Caller ID

Discussion in '3CX Phone System - General' started by taurusgd, Nov 13, 2010.

Thread Status:
Not open for further replies.
  1. taurusgd

    Joined:
    Oct 5, 2010
    Messages:
    17
    Likes Received:
    0
    When an external call comes in the phone no that shows on the operators phone is the IP address of the server and that no also shows on the extension forwareded. What did I miss setting up properly. Am using Yealink T28 phone. If I make an external call to my personal DID I do see the number that called. Went live Friday. Am loving 3CX.
     
  2. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,360
    Likes Received:
    226
    Incoming call from.....a VoIP provider? Please post a 3CX log showing an incoming call.
     
  3. taurusgd

    Joined:
    Oct 5, 2010
    Messages:
    17
    Likes Received:
    0
    from log:
    0:18:09.319 [CM503007]: Call(324): Device joined: sip:100@192.168.0.100:5062
    10:18:09.303 [CM503007]: Call(324): Device joined: sip:219xxxxxx@192.168.0.221:5060
    10:18:06.490 [CM505001]: Ext.100: Device info: Device Identified: [Man: Yealink;Mod: T28;Rev: General] Capabilities:[reinvite, no-replaces, unable-no-sdp, no-recvonly] UserAgent: [Yealink SIP-T28P 2.51.0.10] PBX contact: [sip:100@192.168.0.99:5060]
    10:18:06.490 [CM503002]: Call(324): Alerting sip:100@192.168.0.100:5062
    10:18:05.131 [CM503003]: Call(323): Call to sip:100@192.168.0.99 has failed; Cause: 487 Request Terminated; from IP:192.168.0.100:5062
    10:18:04.662 [CM503025]: Call(324): Calling Ext:Ext.100@[Dev:sip:100@192.168.0.100:5062]
    10:18:04.631 [CM503004]: Call(324): Route 1: Ext:Ext.100@[Dev:sip:100@192.168.0.100:5062]
    10:18:04.631 [CM503010]: Making route(s) to <sip:100@192.168.0.99:5060>
    10:18:04.615 [CM505003]: Provider:[NGT] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [] PBX contact: [sip:219xxxxxxx@192.168.0.99:5060]
    10:18:04.615 [CM503001]: Call(324): Incoming call from @(Ln.10000@NGT) to <sip:100@192.168.0.99:5060>
     
  4. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,360
    Likes Received:
    226
    Either no number is available for the provider to send for this call or there is no caller ID service. Because there is no number, it looks like, for some reason the IP is being delivered o the set. Do you receive any calls where a number shows? It would be just after "Incoming call from", in the log.
     
  5. taurusgd

    Joined:
    Oct 5, 2010
    Messages:
    17
    Likes Received:
    0
    I have my office phone with a DID that is on the list. If I call from an outside no. It will show me the calling no.
    Sometimes now the operator gets the IP no and sometimes it shows our phone no, but not the cust. phone no.
     
  6. taurusgd

    Joined:
    Oct 5, 2010
    Messages:
    17
    Likes Received:
    0
    I have 8 DID nos with inbound rules having all calls go to the operator. I have discoverd that it is the main no I have trouble with. If I call one of the other numbers we see the customer no on the display. Should the primary no not have an inbound rule?
     
  7. taurusgd

    Joined:
    Oct 5, 2010
    Messages:
    17
    Likes Received:
    0
    Problem solved. The voip supplier needed to change some settings. Now I get name and number.
    Thanks
     
Thread Status:
Not open for further replies.