Calls

Discussion in '3CX Phone System - General' started by tfljyan, Jul 29, 2010.

Thread Status:
Not open for further replies.
  1. tfljyan

    Joined:
    Jul 29, 2010
    Messages:
    1
    Likes Received:
    0
    LOG 3CX

    Please Help.

    When i call from soft phone to another extension or telephone company line over gateway it is ok, but when I call to soft phone from city PBX, I receive call in soft phone 2 second, then no receive about 3 second, then receive 2 second, then no receive about 3 second and etc,but telephone company calls go permanent.

    Log.

    18:26:23.200 [CM503003]: Call(12): Call to sip:201@10.10.1.6:5060 has failed; Cause: 487 Request Terminated; from IP:10.10.1.188:5070
    18:26:23.005 [CM503008]: Call(12): Call is terminated
    18:26:19.474 [CM505001]: Ext.201: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [3CXPhone 4.0.13527.0] PBX contact: [sip:201@10.10.1.6:5060]
    18:26:19.474 [CM503002]: Call(12): Alerting sip:201@10.10.1.188:5070;rinstance=980055f382fb1c10
    18:26:19.317 [CM503025]: Call(12): Calling Ext:Ext.201@[Dev:sip:201@10.10.1.188:5070;rinstance=980055f382fb1c10]
    18:26:19.283 [CM503004]: Call(12): Route 1: Ext:Ext.201@[Dev:sip:201@10.10.1.188:5070;rinstance=980055f382fb1c10]
    18:26:19.281 [CM503010]: Making route(s) to <sip:201@192.168.130.113:5060>
    18:26:19.280 [CM505002]: Gateway:[DLink] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [dlink 12-38-28912232-0.10.16-TSO] PBX contact: [sip:10000@10.10.1.6:5060]
    18:26:19.272 [CM503001]: Call(12): Incoming call from 10000@(Ln.10000@DLink) to <sip:201@192.168.130.113:5060>
    18:26:19.263 [CM503012]: Inbound out-of-office hours rule (unnamed) for 10000 forwards to DN:201
     
Thread Status:
Not open for further replies.