Can not get Cisco 7940 to Register

Discussion in '3CX Phone System - General' started by Anonymous, Sep 3, 2006.

Thread Status:
Not open for further replies.
  1. Anonymous

    Anonymous Guest

    I am having trouble getting my Cisco 7940 to register with the PBX. Here is the SIPDefault.cnf syntax I am using...

    # SIP Default Generic Configuration File

    # Image Version
    image_version: P0S3-08-2-00

    # Proxy Server
    proxy1_address: ; Can be dotted IP or FQDN

    # Proxy Server Port (default - 5060)
    proxy1_port: 5060

    # Proxy Registration (0-disable (default), 1-enable)
    proxy_register: 1

    # Phone Registration Expiration [1-3932100 sec] (Default - 3600)
    timer_register_expires: 3600

    # Codec for media stream (g711ulaw (default), g711alaw, g729a)
    preferred_codec: g711alaw

    Here is the Syntax from the SIP000AB78D736A.cnf file:

    # SIP Configuration Generic File

    # Line 1 appearance
    line1_name: Mike Bellini

    # Line 1 Registration Authentication
    line1_authname: 100

    # Line 1 Registration Password
    line1_password: password

    The registration authentication name is the same as the Authentication ID in 3CX as is the password.

    Any ideas?
  2. Anonymous

    Anonymous Guest

    I figured it out.

    For future reference, the Line1_name: value in the SIP<MACAddress>.cnf file needs to match the Authentication ID in 3CX.

    Simple. Great product. I just purchased a VoIP gateway from Grandstream so I will be playing with it a ton more next week. Thanks!

  3. 3CXsupport

    3CXsupport New Member

    Aug 21, 2006
    Likes Received:

    Thanks for the feedback. By the mentioned;
    I assume you have solved your issue. Thanks for the tip, I hope all is plain sailing with the Grandstream. If anything just post here on the forums and I would gladly help anyway possible.
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  4. Anonymous

    Anonymous Guest

    Cisco 7970 Phone

    Has anyone got a Cisco 7970 or 7960 with the Universal Application Loader configuration working with 3CX?
Thread Status:
Not open for further replies.