Cannot call from extensions to extensions

Discussion in '3CX Phone System - General' started by OZ Boy, Sep 12, 2007.

Thread Status:
Not open for further replies.
  1. OZ Boy

    Joined:
    Sep 5, 2007
    Messages:
    4
    Likes Received:
    0
    Hi,

    I have two LinkSys 941 phones
    Phone 1 Ext1 is 100 3cx extension
    Phone 1 Ext2 is 120 3cx extension

    Phone 2 Ext1 is 101 3cx extension
    Phone 2 Ext2 is 121 3cx extension

    Extensions 120 and 121 registered fine (have green light on Line status page).
    Also 120 and 121 could receive inbound calls.

    I can call from 100 to 101, but not to 121 or 120. Same with phone 2 I can call from 101 to 100, but not to 120 or 121.
    Why so?
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  2. OZ Boy

    Joined:
    Sep 5, 2007
    Messages:
    4
    Likes Received:
    0
    I forgot to mention I cannot call because it is busy.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. DanielMonsieux

    Joined:
    Feb 25, 2008
    Messages:
    6
    Likes Received:
    0
    Hi,

    If I understand correct, you have a box, with 2 FXS lines on.
    In that case, the need is to use a different port to register to.
    let´s say. Line 1 registers with port 5060, and line2 registers with port 5061

    Can you check this ?
    I have with other FXS systems had similar errors, but the port numbers were not settable.
    These errors were solved, when I changed software versions (controlled).

    Regards,

    Daniel
     
Thread Status:
Not open for further replies.