Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

Can't add outbound rule BUG

Discussion in '3CX Phone System - General' started by AldoLinares, Jan 12, 2008.

Thread Status:
Not open for further replies.
  1. AldoLinares

    AldoLinares New Member

    Joined:
    Nov 12, 2007
    Messages:
    135
    Likes Received:
    0
    If i add a rule with this settings:

    Prefix: 71044

    Route: PSTN
    Strip Digits: 2
    Prepend: XXXXXXXXXX (10 digit)

    it goes out trough the PSTN but i got a message from the PSTN Provider that i dial the number wrong, i know its ok because if a dial with prefix 9 that have only strip 1 digit it works, and in verbouse log i cant see what number is trying to call

    I need this to add codes for dialing special numbers from extension that are not going to be able to make outbound calls only this special numbers

    this is the log:
    20:38:43.906 Call::Terminate [CM503008]: Call(24): Call is terminated
    20:38:43.906 Call::Terminate [CM503008]: Call(24): Call is terminated
    20:38:38.859 CallLeg::eek:nConfirmed Session 171 of leg C:24.1 is confirmed
    20:38:38.718 CallCtrl::eek:nLegConnected [CM503007]: Call(24): Device joined: sip:10000@192.168.1.91:5060
    20:38:38.703 CallCtrl::eek:nLegConnected [CM503007]: Call(24): Device joined: sip:100@192.168.1.116:5060;transport=udp
    20:38:38.703 MediaServerReporting::SetRemoteParty [MS210003] C:24.1:Answer provided. Connection(transcoding mode):192.168.1.90:7074(7075)
    20:38:38.703 MediaServerReporting::SetRemoteParty [MS210001] C:24.2:Answer received. RTP connection: 192.168.1.91:5016(5017)
    20:38:38.703 CallLeg::setRemoteSdp Remote SDP is set for legC:24.2
    20:38:38.703 Line::printEndpointInfo [CM505002]: Gateway:[Telnor] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [Grandstream GXW4104 (HW 0001, Ch:7) 1.0.1.2] Transport: [sip:192.168.1.90:5060]
    20:38:38.703 CallCtrl::eek:nAnsweredCall [CM503002]: Call(24): Alerting sip:10000@192.168.1.91:5060
    20:38:35.171 MediaServerReporting::SetRemoteParty [MS210002] C:24.2:Offer provided. Connection(transcoding mode): 192.168.1.90:7076(7077)
    20:38:35.156 CallCtrl::eek:nSelectRouteReq [CM503004]: Call(24): Calling: PSTNline:10000@[Dev:sip:10000@192.168.1.91:5060, Dev:sip:10002@192.168.1.91:5062]
    20:38:35.125 CallCtrl::eek:nSelectRouteReq [CM503010]: Making route(s) to [sip:71044@192.168.1.90]
    20:38:35.125 MediaServerReporting::SetRemoteParty [MS210000] C:24.1:Offer received. RTP connection: 192.168.1.116:5004(5005)
    20:38:35.125 CallLeg::setRemoteSdp Remote SDP is set for legC:24.1
    20:38:35.125 Extension::printEndpointInfo [CM505001]: Ext.100: Device info: Device Identified: [Man: GrandStream;Mod: GXP-2000;Rev: General] Capabilities:[reinvite, no-replaces, unable-no-sdp, recvonly] UserAgent: [Grandstream GXP2000 1.1.4.18] Transport: [sip:192.168.1.90:5060]
    20:38:35.093 CallCtrl::eek:nIncomingCall [CM503001]: Call(24): Incoming call from Ext.100 to [sip:71044@192.168.1.90]
    20:38:35.093 CallLeg::eek:nNewCall [CM500002]: Info on incoming INVITE:
    INVITE sip:71044@192.168.1.90 SIP/2.0
    Via: SIP/2.0/UDP 192.168.1.116:5060;branch=z9hG4bK0d654f517ada6464
    Max-Forwards: 70
    Contact: [sip:100@192.168.1.116:5060;transport=udp]
    To: [sip:71044@192.168.1.90]
    From: "Alma Recepcion"[sip:100@192.168.1.90];tag=8ac7397770676477
    Call-ID: bc34620df00d3244@192.168.1.116
    CSeq: 22141 INVITE
    Allow: INVITE, ACK, CANCEL, BYE, NOTIFY, REFER, OPTIONS, INFO, SUBSCRIBE, UPDATE, PRACK, MESSAGE
    Proxy-Authorization: Digest username="100",realm="3CXPhoneSystem",algorithm=MD5,uri="sip:71044@192.168.1.90",nonce="12844586314:9c0bb13ee50471f5f604d9efeaf76a31",response="5e5fd2977c1e69efb012e8acb7d8ee59"
    Supported: replaces, timer, path
    User-Agent: Grandstream GXP2000 1.1.4.18
    Content-Length: 0
     
Thread Status:
Not open for further replies.