Can't make outgoing calls from CISCO ATA 186

Discussion in '3CX Phone System - General' started by maxbn, Dec 16, 2008.

Thread Status:
Not open for further replies.
  1. maxbn

    Joined:
    Dec 16, 2008
    Messages:
    1
    Likes Received:
    0
    Hello,
    I try to use 3cx system version 7 with cisco ATA 186 with SIP firmware ATA030201SIP050616A.zup. I can see ATA status regestered and get incoming calls. Moreover, I can call to another extension (such as the 7912 Cisco phone) but any other outgoing call terminated with authorization error:

    16:09:44.681 [CM502001]: Source info: From: "ATA_Port0"<sip:6002@10.10.20.45:5061;user=phone>;tag=3845434265<sip:9264542@10.10.20.45;user=phone>
    16:09:44.681 [CM503013]: Call(306): Incoming call rejected, caller is unknown; msg=SipReq: INVITE 9264542@10.10.20.45 tid=7a4da474ed51c739 cseq=INVITE contact=6002@10.10.10.50:5061 / 2 from(wire)
    16:09:44.681 [CM500002]: Info on incoming INVITE:

    INVITE sip:9264542@10.10.20.45;user=phone SIP/2.0
    Via: SIP/2.0/UDP 10.10.10.50:5061;branch=z9hG4bK7a4da474ed51c739
    Contact: "ATA_Port0"<sip:6002@10.10.10.50:5061;user=phone;transport=udp>
    To: <sip:9264542@10.10.20.45;user=phone>
    From: "ATA_Port0"<sip:6002@10.10.20.45:5061;user=phone>;tag=3845434265
    Call-ID: 2741561524@192.168.25.4
    CSeq: 2 INVITE
    Expires: 300
    Allow: ACK, BYE, CANCEL, INVITE, NOTIFY, OPTIONS, REFER, REGISTER, PRACK, UPDATE
    Proxy-Authorization: Digest username="6002",realm="3CXPhoneSystem",nonce="12873906584:3b811dc85f17e572897fccaf14c43a19",uri="sip:9264542@10.10.20.45",response="ed784130756f1d3040a67ca0e04dd9ce"
    Supported: 100rel, replaces
    User-Agent: Cisco ATA 186 v3.2.1 atasip (050616A)
    Content-Length: 0

    16:09:44.494 [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:

    INVITE sip:9264542@10.10.20.45;user=phone SIP/2.0
    Via: SIP/2.0/UDP 10.10.10.50:5061;branch=z9hG4bK74581ed31bd2688b
    Contact: "ATA_Port0"<sip:6002@10.10.10.50:5061;user=phone;transport=udp>
    To: <sip:9264542@10.10.20.45;user=phone>
    From: "ATA_Port0"<sip:6002@10.10.20.45:5061;user=phone>;tag=3845434265
    Call-ID: 2741561524@192.168.25.4
    CSeq: 1 INVITE
    Expires: 300
    Allow: ACK, BYE, CANCEL, INVITE, NOTIFY, OPTIONS, REFER, REGISTER, PRACK, UPDATE
    Supported: 100rel, replaces
    User-Agent: Cisco ATA 186 v3.2.1 atasip (050616A)
    Content-Length: 0

    16:09:44.494 [CM302001]: Authorization system can not identify source of: SipReq: INVITE 9264542@10.10.20.45 tid=74581ed31bd2688b cseq=INVITE contact=6002@10.10.10.50:5061 / 1 from(wire)

    Do anyone have any ideas what's the problem?
     
  2. Nick Galea

    Nick Galea Site Admin

    Joined:
    Jun 6, 2006
    Messages:
    1,939
    Likes Received:
    250
    I suggest using an ATA that is supported and much easier to setup, for example Grandstream or Linksys ATA's...
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
Thread Status:
Not open for further replies.