- Joined
- Oct 30, 2012
- Messages
- 3
- Reaction score
- 0
Hello,
Since we have created a bridge between a other voip server and our 3cx box, we see on outgoing calls via this bridge in the CDR as outgoing caller id : (@(Ln.10001@Voip))
The call can be made without any problems, but because of this, the outbound caller ID cannot be setup right.
In 3cx we setup the bridge as master, under advaced, the SIP From : Display name as "CallerNum" (From->user)
At the trunk side, under outbound Parameters :
From : Display name "OutboundCallerId" Caller ID taken from extenension
From User part: Callername
From : Host Part : GWHostPort
I can't find out what the problem is, because when I check logs from the other server side, outbound caller ID is sending to the 3cx box.
Hope someone can help me to the right direction.
Since we have created a bridge between a other voip server and our 3cx box, we see on outgoing calls via this bridge in the CDR as outgoing caller id : (@(Ln.10001@Voip))
The call can be made without any problems, but because of this, the outbound caller ID cannot be setup right.
In 3cx we setup the bridge as master, under advaced, the SIP From : Display name as "CallerNum" (From->user)
At the trunk side, under outbound Parameters :
From : Display name "OutboundCallerId" Caller ID taken from extenension
From User part: Callername
From : Host Part : GWHostPort
I can't find out what the problem is, because when I check logs from the other server side, outbound caller ID is sending to the 3cx box.
Hope someone can help me to the right direction.