Cisco 7905 Provisioning

Discussion in '3CX Phone System - General' started by ljcostello, Jun 6, 2011.

Thread Status:
Not open for further replies.
  1. ljcostello

    Joined:
    Jun 6, 2011
    Messages:
    8
    Likes Received:
    0
    Does anyone know how to get the Cisco 7905 provisioned to version 10? we have the correct firmware etc on the phones however the 3cx system isnt recognising the phones.
     
  2. davidbenwell

    davidbenwell Active Member

    Joined:
    Apr 27, 2010
    Messages:
    704
    Likes Received:
    0
    just did a quick search of google and this should be the same process almost as the 7940 http://www.3cx.com/sip-phones/cisco-7940g-7960g/

    use that link as a base line to get you well on the way, should take no longer then 10-15 minutes to get this phone up and running.

    use the correct config files and edit and follow the 7940 guide for example.

    if you cant get this working, ill see if i can get hold of a config for you.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. ljcostello

    Joined:
    Jun 6, 2011
    Messages:
    8
    Likes Received:
    0
    Thank you so much, that worked well. Just had to fiddle a little with the SIP settings on the actual phones, making sure they read the files correctly and it worked.
     
  4. boathead71

    Joined:
    Feb 21, 2011
    Messages:
    1
    Likes Received:
    0
    Hi Have a look at the attached i have spent a while on this. Most of it Works.
     

    Attached Files:

Thread Status:
Not open for further replies.