Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

Cisco 7940 7960 config SIP Firmware POs3-08-2-00

Discussion in '3CX Phone System - General' started by AWnet, Nov 22, 2007.

Thread Status:
Not open for further replies.
  1. AWnet

    Joined:
    Nov 22, 2007
    Messages:
    1
    Likes Received:
    0
    Does anyone have any complete SEPMAC.cnf.xml, SIPdefault.cnf, SIPMAC.cnf config files they can submit.
    I have created the above but when I power the phones up they get to the point of loading SIPMAC.cnf and reboot. If I pause the TFTP server for 30 seconds, then restart TFTP they load the config and work.
    I also do not believe that the phones are reading the SIPDefault.cnf file as they were not picking up settings in the SIPDefault.cnf file but if I moved to the SIPMAC.cnf file then the phones apply the settings.

    SEPMAC.cnf.xml

    <device>
    <deviceProtocol>SIP</deviceProtocol>
    <sshUserId>awnet</sshUserId>
    <sshPassword>aw0rd1</sshPassword>
    <devicePool>
    <dateTimeSetting>
    <dateTemplate>D-M-Y</dateTemplate>
    <timeZone>GMT Standard/Daylight Time</timeZone>
    <ntps>
    <ntp>
    <name>192.168.100.14</name>
    </ntp>
    </ntps>
    </dateTimeSetting>
    <callManagerGroup>
    <members>
    <member priority="0">
    <callManager>
    <ports>
    <ethernetPhonePort>2000</ethernetPhonePort>
    <sipPort>5060</sipPort>
    <securedSipPort>5061</securedSipPort>
    </ports>
    <processNodeName>192.168.100.14</processNodeName>
    </callManager>
    </member>
    </members>
    </callManagerGroup>
    </devicePool>
    <sipProfile>
    <sipProxies>
    <registerWithProxy>true</registerWithProxy>
    </sipProxies>
    <enableVad>false</enableVad>
    <!—Note – This following may need to be just g711 in later firmware versions -->
    <preferredCodec>g711</preferredCodec>
    <natEnabled></natEnabled>
    <phoneLabel>Robert</phoneLabel>
    <sipLines>
    <line button="1">
    <featureID>9</featureID>
    <featureLabel>100</featureLabel>
    <proxy>192.168.100.14</proxy>
    <name>100</name>
    <displayName>Robert</displayName>
    <authName>100</authName>
    <authPassword>100</authPassword>
    <messagesNumber>999</messagesNumber>
    </line>
    <line button="2">
    <featureID>21</featureID>
    <featureLabel>SpeedDial</featureLabel>
    <speedDialNumber>5551234</speedDialNumber>
    </line>
    </sipLines>
    <dialTemplate>DRdialplan.xml</dialTemplate>
    </sipProfile>
    <commonProfile>
    <phonePassword></phonePassword>
    </commonProfile>
    <loadInformation>POS3-08-2-00</loadInformation>
    <versionStamp></versionStamp>
    <directoryURL></directoryURL>
    <servicesURL></servicesURL>
    </device>

    SIP Default.cnf

    image_version: "POS3-08-2-00"
    #Proxy Server
    proxy1_address: "192.168.100.14"
    #Proxy Server Port (default-5060)
    proxy1_ports: "5060"
    #Proxy Registration (0-disable (default), 1-enable)
    proxy_register: "1"
    #Phone Registration Expiration [1-3932100 sec] (default 3600)
    timer_register_expires: "60"
    #Codec for media stream (g711ulaw (default), g711ulaw, g729a)
    preferred_codec: "g711"

    SIPMAC.cnf

    #Line 1 appearance
    line1_name: 100
    line2_displayname: Rob
    # Line 1 Registration Authentication
    line1_authname: 100
    #Line 1 Registration Authentication
    line1_password: 100
    # Line 2 Setting
    line2_name: ""
    #Line 2 Display Name
    line2_displayname: ""
    #Line 2 Registration Authentication
    line2_authname: "UNPROVISIONED"
    line2_password: "UNPROVISIONED"
    #Proxy Server
    proxy1_address: "192.168.100.14"
    #Proxy Server Port (default-5060)
    proxy1_ports: "5060"
    #Proxy Registration (0-disable (default), 1-enable)
    proxy_register: "1"
    #Phone Registration Expiration [1-3932100 sec] (default 3600)
    timer_register_expires: "60"
    #Codec for media stream (g711ulaw (default), g711ulaw, g729a)
    preferred_codec: "g711"
    # Emergency Proxy
    info proxy_emergency: "192.168.100.14"
    proxy_emergency_port: "5060"
    # Backup Proxy info
    proxy_backup: "192.168.100.14"
    proxy_backup_port: "5060"
    # Outbound Proxy info
    outbound_proxy: ""
    outbound_proxy_port: "5060"
    # NAT/Firewall Traversal
    nat_enable: "1"
    nat_address: ""
    voip_control_port: "5060"
    start_media_port: "16384"
    end_media_port: "32766"
    nat_received_processing: "1"
    # Phone Label (Text desired to be displayed in upper right corner)
    phone_label: "ROB"
    #Has no effect on SIP messaging
    # Time Zone phone will reside in
    time_zone: "GMT Standard/Daylight Time"
    # Telnet Level (enable or disable the ability to telnet into this phone
    telnet_level: "2"
    # 0-Disabled (default), 1-Enabled, 2-Privileged
    # Phone prompt/password for telnet/console session
    phone_prompt: "Go Away"
    #Telnet/Console Prompt
    phone_password: "aw0rd1"
    #Telnet/Console Password
    # Enable_VAD (1-enabled, 0-disabled)
    enable_vad: "0"
    # Network Media Type (auto, full100, full10, half100, half10)
    network_media_type: "auto"
    user_info: phone
    # URL for external Directory location
    #URL for branding logo to be used on phone display
    #logo_url: "http://10.0.1.3/10-20logo.bmp"

    Any help appreciated.

    rob- AWnet
     
Thread Status:
Not open for further replies.