Cisco 7941 Phone Issues

Discussion in '3CX Phone System - General' started by IKWeb, Jun 3, 2012.

Thread Status:
Not open for further replies.
  1. IKWeb

    Joined:
    Jun 3, 2012
    Messages:
    8
    Likes Received:
    0
    Hello All

    Well after spending hours working out how to send a config to a Cisco 7941 I have managed it.. :)

    One problem tho, the routing of calls etc works fine, but I cant get the handset on the phone to work... when it calls I can only answer calls by speaker, and also make calls this way. Below is my config, if anyone can help I would be very very greatful.

    <device>
    <deviceProtocol>SIP</deviceProtocol>
    <sshUserId>admin</sshUserId>
    <sshPassword>cisco</sshPassword>
    <devicePool>
    <dateTimeSetting>
    <dateTemplate>D-M-Y</dateTemplate>
    <timeZone>Greenwich Standard Time</timeZone>
    <ntps>
    <ntp>
    <name>130.88.203.12</name>
    </ntp>
    </ntps>
    </dateTimeSetting>
    <callManagerGroup>
    <members>
    <member priority="0">
    <callManager>
    <ports>
    <ethernetPhonePort>2000</ethernetPhonePort>
    <sipPort>5060</sipPort>
    <securedSipPort>5061</securedSipPort>
    </ports>
    <processNodeName>192.168.0.59</processNodeName>
    </callManager>
    </member>
    </members>
    </callManagerGroup>
    </devicePool>
    <sipProfile>
    <sipProxies>
    <registerWithProxy>true</registerWithProxy>
    </sipProxies>
    <enableVad>false</enableVad>
    <preferredCodec>g711</preferredCodec>
    <natEnabled></natEnabled>
    <phoneLabel>Danny Office</phoneLabel>
    <sipLines>
    <line button="1">
    <featureID>9</featureID>
    <featureLabel>100</featureLabel>
    <proxy>192.168.0.59</proxy>
    <port>5060</port>
    <name>100</name>
    <displayName>100</displayName>
    <autoAnswer>
    <autoAnswerEnabled>2</autoAnswerEnabled>
    </autoAnswer>
    <callWaiting>3</callWaiting>
    <authName>100</authName>
    <authPassword>100</authPassword>
    <sharedLine>false</sharedLine>
    <messageWaitingLampPolicy>3</messageWaitingLampPolicy>
    <messagesNumber>800</messagesNumber>
    <ringSettingIdle>4</ringSettingIdle>
    <ringSettingActive>5</ringSettingActive>
    <contact>200</contact>
    <forwardCallInfoDisplay>
    <callerName>true</callerName>
    <callerNumber>false</callerNumber>
    <redirectedNumber>false</redirectedNumber>
    <dialedNumber>true</dialedNumber>
    </forwardCallInfoDisplay>
    </line>
    <line button="2">
    <featureID>9</featureID>
    <featureLabel>101</featureLabel>
    <proxy>192.168.0.59</proxy>
    <port>5060</port>
    <name>101</name>
    <displayName>101</displayName>
    <autoAnswer>
    <autoAnswerEnabled>2</autoAnswerEnabled>
    </autoAnswer>
    <callWaiting>3</callWaiting>
    <authName>101</authName>
    <authPassword>101</authPassword>
    <sharedLine>false</sharedLine>
    <messageWaitingLampPolicy>3</messageWaitingLampPolicy>
    <messagesNumber>800</messagesNumber>
    <ringSettingIdle>4</ringSettingIdle>
    <ringSettingActive>5</ringSettingActive>
    <contact>200</contact>
    <forwardCallInfoDisplay>
    <callerName>true</callerName>
    <callerNumber>false</callerNumber>
    <redirectedNumber>false</redirectedNumber>
    <dialedNumber>true</dialedNumber>
    </forwardCallInfoDisplay>
    </line>
    </sipLines>
    <dialTemplate>dialplan.xml</dialTemplate>
    </sipProfile>
    <userLocale>
    <name>English_United_Knigdom</name>
    <langCode>en</langCode>
    </userLocale>
    <networkLocale>United_Knigdon</networkLocale>
    <networkLocaleInfo>
    <name>United_Knigdom</name>
    </networkLocaleInfo>
    <commonProfile>
    <phonePassword></phonePassword>
    </commonProfile>
    <directoryURL></directoryURL>
    <servicesURL></servicesURL>
    </device>
     
  2. miro

    Joined:
    Jan 17, 2012
    Messages:
    51
    Likes Received:
    0
    Hi,

    when you lift your handset on phone is there any change on phone display (enter number), can you even enter the number,if you can what happen when you press dial ? Did you check your cable on headset :)


    PS.

    We also have 7941, 7911, 7912 they all work like a charm .

    Best regards
     
Thread Status:
Not open for further replies.