Cisco 7941g

Discussion in '3CX Phone System - General' started by richie314nj, Jun 22, 2007.

  1. richie314nj

    Joined:
    Jun 22, 2007
    Messages:
    19
    Likes Received:
    0
    Forgive me if I sound like a newbie to this, that is because I am.
    Is there any sample configuration for the Cicso 7941g phone & 3CX or template I can use to configure the phone to work with 3CX.
    I've gotten the TFTP and SIP firmware on the server and phone see it but the XML is where I get lost.

    :?
     
  2. 3CXsupport

    3CXsupport New Member
    3CX Staff

    Joined:
    Aug 21, 2006
    Messages:
    193
    Likes Received:
    0
    Hi,

    Excuse me but I do not entirley understand your queston, what seems to be the problem exactly ?
     
  3. ITWorks

    ITWorks New Member

    Joined:
    Apr 7, 2007
    Messages:
    121
    Likes Received:
    0
    Here is a resource for configuring your cnf.xml files. The 7941's work very well except the message waiting waiting indicator will not work and that is due to how Cisco has implemented the RFC.

    http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP

    Mark
     
  4. richie314nj

    Joined:
    Jun 22, 2007
    Messages:
    19
    Likes Received:
    0
    Thanks Mark.
    That is just what I was looking for.
     
  5. richie314nj

    Joined:
    Jun 22, 2007
    Messages:
    19
    Likes Received:
    0
    Cisco 7941 config

    Has any one successfully config Cisco 7941g phone to work with 3CX?
     
  6. ITWorks

    ITWorks New Member

    Joined:
    Apr 7, 2007
    Messages:
    121
    Likes Received:
    0
    I have 10 of them working with 3CX. Let me know what is it you are having problems with and perhaps I can help. Have you installed the SIP firmware on the phones? If you need a working sample cfg.xml I can provide that.

    Mark
     
  7. richie314nj

    Joined:
    Jun 22, 2007
    Messages:
    19
    Likes Received:
    0
    Yes, I've installed the SIP firmware on the phones. A working sample of the cfg.xml files would be a great help.

    Thanks.
     
  8. ITWorks

    ITWorks New Member

    Joined:
    Apr 7, 2007
    Messages:
    121
    Likes Received:
    0
    Below is a configuration that will work with 3CX on a 7941 phone. Change the x.x.x.x to the address of your 3CX server. Set the time zone to your locale and ntp server of your choice. Change the 1111's to the extension number and password of your phones. Change the SIP41.8-2-2SR1S in load information to the firmware file version you are using. Save this file as SEPMACaddressofphone.cnf.xml. Place this file in the root directory of your TFTP server. Make sure to configure option 150 in your phone DHCP server scope to point to your TFTP server.

    This config assumes the voice mail extension is 9999. It also configures the second line button to automaticaly dial nine for an outside line when pressed.

    Mark

    <?xml version="1.0" encoding="UTF-8"?>
    <device>
    <deviceProtocol>SIP</deviceProtocol>
    <sshUserId>admin</sshUserId>
    <sshPassword>password</sshPassword>
    <devicePool>
    <dateTimeSetting>
    <dateTemplate>M-D-Ya</dateTemplate>
    <timeZone>Alaskan Standard/Daylight Time</timeZone>
    <ntps>
    <ntp>
    <name>199.165.76.11</name>
    <ntpMode>Unicast</ntpMode>
    </ntp>
    </ntps>
    </dateTimeSetting>
    <callManagerGroup>
    <members>
    <member priority="0">
    <callManager>
    <ports>
    <ethernetPhonePort>2000</ethernetPhonePort>
    <sipPort>5060</sipPort>
    <securedSipPort>5061</securedSipPort>
    </ports>
    <processNodeName>x.x.x.x</processNodeName>
    </callManager>
    </member>
    </members>
    </callManagerGroup>
    </devicePool>
    <sipProfile>
    <sipProxies>
    <backupProxy></backupProxy>
    <backupProxyPort></backupProxyPort>
    <emergencyProxy></emergencyProxy>
    <emergencyProxyPort></emergencyProxyPort>
    <outboundProxy></outboundProxy>
    <outboundProxyPort></outboundProxyPort>
    <registerWithProxy>true</registerWithProxy>
    </sipProxies>
    <sipCallFeatures>
    <cnfJoinEnabled>true</cnfJoinEnabled>
    <callForwardURI>x--serviceuri-cfwdall</callForwardURI>
    <callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>
    <callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>
    <callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>
    <meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>
    <abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>
    <rfc2543Hold>false</rfc2543Hold>
    <callHoldRingback>2</callHoldRingback>
    <localCfwdEnable>true</localCfwdEnable>
    <semiAttendedTransfer>true</semiAttendedTransfer>
    <anonymousCallBlock>2</anonymousCallBlock>
    <callerIdBlocking>2</callerIdBlocking>
    <dndControl>0</dndControl>
    <remoteCcEnable>true</remoteCcEnable>
    </sipCallFeatures>
    <sipStack>
    <sipInviteRetx>6</sipInviteRetx>
    <sipRetx>10</sipRetx>
    <timerInviteExpires>180</timerInviteExpires>
    <timerRegisterExpires>3600</timerRegisterExpires>
    <timerRegisterDelta>5</timerRegisterDelta>
    <timerKeepAliveExpires>120</timerKeepAliveExpires>
    <timerSubscribeExpires>120</timerSubscribeExpires>
    <timerSubscribeDelta>5</timerSubscribeDelta>
    <timerT1>500</timerT1>
    <timerT2>4000</timerT2>
    <maxRedirects>70</maxRedirects>
    <remotePartyID>false</remotePartyID>
    <userInfo>None</userInfo>
    </sipStack>
    <autoAnswerTimer>1</autoAnswerTimer>
    <autoAnswerAltBehavior>false</autoAnswerAltBehavior>
    <autoAnswerOverride>true</autoAnswerOverride>
    <transferOnhookEnabled>false</transferOnhookEnabled>
    <enableVad>false</enableVad>
    <preferredCodec>g711ulaw</preferredCodec>
    <dtmfAvtPayload>101</dtmfAvtPayload>
    <dtmfDbLevel>3</dtmfDbLevel>
    <dtmfOutofBand>avt</dtmfOutofBand>
    <alwaysUsePrimeLine>false</alwaysUsePrimeLine>
    <alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail>
    <kpml>3</kpml>
    <natEnabled>0</natEnabled>
    <natAddress></natAddress>
    <phoneLabel>user</phoneLabel>
    <stutterMsgWaiting>2</stutterMsgWaiting>
    <callStats>false</callStats>
    <silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>
    <disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig>
    <startMediaPort>16384</startMediaPort>
    <stopMediaPort>32766</stopMediaPort>
    <sipLines>
    <line button="1">
    <featureID>9</featureID>
    <featureLabel>1111</featureLabel>
    <proxy>10.10.30.3</proxy>
    <port>5060</port>
    <name>1111</name>
    <displayName>1111</displayName>
    <autoAnswer>
    <autoAnswerEnabled>2</autoAnswerEnabled>
    </autoAnswer>
    <callWaiting>3</callWaiting>
    <authName>1111</authName>
    <authPassword>1111</authPassword>
    <sharedLine>false</sharedLine>
    <messageWaitingLampPolicy>3</messageWaitingLampPolicy>
    <messagesNumber>9999</messagesNumber>
    <ringSettingIdle>4</ringSettingIdle>
    <ringSettingActive>5</ringSettingActive>
    <contact>1111</contact>
    <forwardCallInfoDisplay>
    <callerName>true</callerName>
    <callerNumber>false</callerNumber>
    <redirectedNumber>false</redirectedNumber>
    <dialedNumber>true</dialedNumber>
    </forwardCallInfoDisplay>
    </line>
    <line button="2">
    <featureID>21</featureID>
    <featureLabel>dials9</featureLabel>
    <speedDialNumber>9</speedDialNumber>
    </line>
    </sipLines>
    <voipControlPort>5060</voipControlPort>
    <dscpForAudio>184</dscpForAudio>
    <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>
    <dialTemplate>DRdialplan.xml</dialTemplate>
    </sipProfile>
    <commonProfile>
    <phonePassword></phonePassword>
    <backgroundImageAccess>true</backgroundImageAccess>
    <callLogBlfEnabled>2</callLogBlfEnabled>
    </commonProfile>
    <loadInformation>SIP41.8-2-2SR1S</loadInformation>
    <vendorConfig>
    <disableSpeaker>false</disableSpeaker>
    <disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
    <pcPort>0</pcPort>
    <settingsAccess>1</settingsAccess>
    <garp>0</garp>
    <voiceVlanAccess>0</voiceVlanAccess>
    <videoCapability>0</videoCapability>
    <autoSelectLineEnable>0</autoSelectLineEnable>
    <webAccess>0</webAccess>
    <spanToPCPort>1</spanToPCPort>
    <loggingDisplay>1</loggingDisplay>
    <loadServer></loadServer>
    </vendorConfig>
    <versionStamp>1143565489-a3cbf294-7526-4c29-8791-c4fce4ce4c37</versionStamp>
    <networkLocale></networkLocale>
    <networkLocaleInfo>
    <name></name>
    <version>5.0(2)</version>
    </networkLocaleInfo>
    <deviceSecurityMode>0</deviceSecurityMode>
    <authenticationURL></authenticationURL>
    <directoryURL></directoryURL>
    <idleURL></idleURL>
    <informationURL></informationURL>
    <messagesURL></messagesURL>
    <proxyServerURL></proxyServerURL>
    <servicesURL></servicesURL>
    <dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>
    <dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
    <dscpForCm2Dvce>96</dscpForCm2Dvce>
    <transportLayerProtocol>4</transportLayerProtocol>
    <capfAuthMode>0</capfAuthMode>
    <capfList>
    <capf>
    <phonePort>3804</phonePort>
    </capf>
    </capfList>
    <certHash></certHash>
    <encrConfig>false</encrConfig>
    </device>
     
  9. richie314nj

    Joined:
    Jun 22, 2007
    Messages:
    19
    Likes Received:
    0
    Cico 7941g - Thanks

    Thanks for the sample cfg. :D
    Will try tomorrow.
    The help is certainly appreciated.
     
  10. richie314nj

    Joined:
    Jun 22, 2007
    Messages:
    19
    Likes Received:
    0
    Now I keep getting "Unprovisioned: on the phone.
    Can there be an error in my XML?
    Below is my code:

    <?xml version="1.0" encoding="utf-8"?>
    <device>
    <deviceProtocol>SIP</deviceProtocol>
    <sshUserId>admin</sshUserId>
    <sshPassword>password</sshPassword>
    <devicePool>
    <dateTimeSetting>
    <dateTemplate>M-D-Ya</dateTemplate>
    <timeZone>Eastern Standard/Daylight Time</timeZone>
    <ntps>
    <ntp>
    <name>192.168.50.1</name>
    <ntpMode>Unicast</ntpMode>
    </ntp>
    </ntps>
    </dateTimeSetting>
    <callManagerGroup>
    <members>
    <member priority="0">
    <callManager>
    <ports>
    <ethernetPhonePort>2000</ethernetPhonePort>
    <sipPort>5060</sipPort>
    <securedSipPort>5061</securedSipPort>
    </ports>
    <processNodeName>192.168.50.2</processNodeName>
    </callManager>
    </member>
    </members>
    </callManagerGroup>
    </devicePool>
    <sipProfile>
    <sipProxies>
    <backupProxy></backupProxy>
    <backupProxyPort></backupProxyPort>
    <emergencyProxy></emergencyProxy>
    <emergencyProxyPort></emergencyProxyPort>
    <outboundProxy></outboundProxy>
    <outboundProxyPort></outboundProxyPort>
    <registerWithProxy>true</registerWithProxy>
    </sipProxies>
    <sipCallFeatures>
    <cnfJoinEnabled>true</cnfJoinEnabled>
    <callForwardURI>x--serviceuri-cfwdall</callForwardURI>
    <callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>
    <callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>
    <callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>
    <meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>
    <abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>
    <rfc2543Hold>false</rfc2543Hold>
    <callHoldRingback>2</callHoldRingback>
    <localCfwdEnable>true</localCfwdEnable>
    <semiAttendedTransfer>true</semiAttendedTransfer>
    <anonymousCallBlock>2</anonymousCallBlock>
    <callerIdBlocking>2</callerIdBlocking>
    <dndControl>0</dndControl>
    <remoteCcEnable>true</remoteCcEnable>
    </sipCallFeatures>
    <sipStack>
    <sipInviteRetx>6</sipInviteRetx>
    <sipRetx>10</sipRetx>
    <timerInviteExpires>180</timerInviteExpires>
    <timerRegisterExpires>3600</timerRegisterExpires>
    <timerRegisterDelta>5</timerRegisterDelta>
    <timerKeepAliveExpires>120</timerKeepAliveExpires>
    <timerSubscribeExpires>120</timerSubscribeExpires>
    <timerSubscribeDelta>5</timerSubscribeDelta>
    <timerT1>500</timerT1>
    <timerT2>4000</timerT2>
    <maxRedirects>70</maxRedirects>
    <remotePartyID>false</remotePartyID>
    <userInfo>None</userInfo>
    </sipStack>
    <autoAnswerTimer>1</autoAnswerTimer>
    <autoAnswerAltBehavior>false</autoAnswerAltBehavior>
    <autoAnswerOverride>true</autoAnswerOverride>
    <transferOnhookEnabled>false</transferOnhookEnabled>
    <enableVad>false</enableVad>
    <preferredCodec>g711ulaw</preferredCodec>
    <dtmfAvtPayload>101</dtmfAvtPayload>
    <dtmfDbLevel>3</dtmfDbLevel>
    <dtmfOutofBand>avt</dtmfOutofBand>
    <alwaysUsePrimeLine>false</alwaysUsePrimeLine>
    <alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail>
    <kpml>3</kpml>
    <natEnabled>0</natEnabled>
    <natAddress></natAddress>
    <phoneLabel>user</phoneLabel>
    <stutterMsgWaiting>2</stutterMsgWaiting>
    <callStats>false</callStats>
    <silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>
    <disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig>
    <startMediaPort>16384</startMediaPort>
    <stopMediaPort>32766</stopMediaPort>
    <sipLines>
    <line button="1">
    <featureID>9</featureID>
    <featureLabel>100</featureLabel>
    <proxy>192.168.50.2</proxy>
    <port>5060</port>
    <name>100</name>
    <displayName>100</displayName>
    <autoAnswer>
    <autoAnswerEnabled>2</autoAnswerEnabled>
    </autoAnswer>
    <callWaiting>3</callWaiting>
    <authName>100</authName>
    <authPassword>100</authPassword>
    <sharedLine>false</sharedLine>
    <messageWaitingLampPolicy>3</messageWaitingLampPolicy>
    <messagesNumber>999</messagesNumber>
    <ringSettingIdle>4</ringSettingIdle>
    <ringSettingActive>5</ringSettingActive>
    <contact>100</contact>
    <forwardCallInfoDisplay>
    <callerName>true</callerName>
    <callerNumber>false</callerNumber>
    <redirectedNumber>false</redirectedNumber>
    <dialedNumber>true</dialedNumber>
    </forwardCallInfoDisplay>
    </line>
    <line button="2">
    <featureID>21</featureID>
    <featureLabel>dials9</featureLabel>
    <speedDialNumber>9</speedDialNumber>
    </line>
    </sipLines>
    <voipControlPort>5060</voipControlPort>
    <dscpForAudio>184</dscpForAudio>
    <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>
    <dialTemplate>DRdialplan.xml</dialTemplate>
    </sipProfile>
    <commonProfile>
    <phonePassword></phonePassword>
    <backgroundImageAccess>true</backgroundImageAccess>
    <callLogBlfEnabled>2</callLogBlfEnabled>
    </commonProfile>
    <loadInformation>SIP41.8-2-2SR4S</loadInformation>
    <vendorConfig>
    <disableSpeaker>false</disableSpeaker>
    <disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
    <pcPort>0</pcPort>
    <settingsAccess>1</settingsAccess>
    <garp>0</garp>
    <voiceVlanAccess>0</voiceVlanAccess>
    <videoCapability>0</videoCapability>
    <autoSelectLineEnable>0</autoSelectLineEnable>
    <webAccess>0</webAccess>
    <spanToPCPort>1</spanToPCPort>
    <loggingDisplay>1</loggingDisplay>
    <loadServer></loadServer>
    </vendorConfig>
    <versionStamp>1143565489-a3cbf294-7526-4c29-8791-c4fce4ce4c37</versionStamp>
    <networkLocale></networkLocale>
    <networkLocaleInfo>
    <name></name>
    <version>5.0(2)</version>
    </networkLocaleInfo>
    <deviceSecurityMode>0</deviceSecurityMode>
    <authenticationURL></authenticationURL>
    <directoryURL></directoryURL>
    <idleURL></idleURL>
    <informationURL></informationURL>
    <messagesURL></messagesURL>
    <proxyServerURL></proxyServerURL>
    <servicesURL></servicesURL>
    <dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>
    <dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
    <dscpForCm2Dvce>96</dscpForCm2Dvce>
    <transportLayerProtocol>4</transportLayerProtocol>
    <capfAuthMode>0</capfAuthMode>
    <capfList>
    <capf>
    <phonePort>3804</phonePort>
    </capf>
    </capfList>
    <certHash></certHash>
    <encrConfig>false</encrConfig>
    </device>
     
  11. ITWorks

    ITWorks New Member

    Joined:
    Apr 7, 2007
    Messages:
    121
    Likes Received:
    0
    Cisco 7941 deployment

    Your SEPcfg.xml looks good. Can you monitor the TFTP server and see that the .cfg.xml file is actually being transfered successfully to the phone?

    Mark
     
  12. riceboi

    Joined:
    Apr 11, 2007
    Messages:
    17
    Likes Received:
    0
    you can check the IP Phone under settings -> options 6 and then option 1 to see if the phone can find the SEP<mac>.xml file on your tftp server
     
  13. richie314nj

    Joined:
    Jun 22, 2007
    Messages:
    19
    Likes Received:
    0
    TFTP

    The TFTP says is transfers xml file successfully.

    Status message says on phone stays:
    11:33:06p SEP001873E00E9B.cnf.xml
    11:33:06p Error Verifying Config Info
    11:33:37p File Not Found : CTLFile.tlv
    11:33:37p No CTL installed
    11:33:38p SEP001873E00E9B.cnf.xml
    11:33:38p Error Verifying Config Info
    11:34:09p File Not Found : CTLFile.tlv
    11:34:10p No CTL installed
    11:34:10p SEP001873E00E9B.cnf.xml
    11:34:11p Error Verifying Config Info


    I place empty CTLfile.tlv and phone goes in to loop.
     
  14. ITWorks

    ITWorks New Member

    Joined:
    Apr 7, 2007
    Messages:
    121
    Likes Received:
    0
    cisco 7941

    I may remember running into this. Something to do with the firmware files that can be loaded have the extension bin or sbin, with the sbin being the secure files requirining a certificate on the server. I believe I only used the non-secure files with the system I implemented. Sorry to be so vague.

    Mark
     
  15. ITWorks

    ITWorks New Member

    Joined:
    Apr 7, 2007
    Messages:
    121
    Likes Received:
    0
    Cisco 7941

    I checked the Cisco 7941's that I have installed and are working, they show: the No CTL installed messge and a TFTP Timeout: CTLFile.tlv
    However they work fine. So it looks like it is a problem with the SEPmac.cfg.xml file. When I get a chance I will try your config on one of our phones to see if I can see where the problem is.
     
  16. nickybrg

    nickybrg Well-Known Member
    3CX Staff

    Joined:
    Jun 7, 2007
    Messages:
    1,621
    Likes Received:
    15
    Hi Guys
    This occurs when a certificate trust list (CTL) file is not installed in the phone. This also occurs if security is not configured or, if security is configured, because the CTL file does not exist on the TFTP server.

    You should unlock the CTL to make any changes to it anyway - to unlock do the following:

    --Press **# to unlock options on the Security Configuration menu.
    If you decide not to continue, press **# again to lock options on this menu.

    ---Highlight the CTL option.

    ----Press the Unlock softkey to unlock the CTL file.

    Let me check further on this ok and I will get back and update the post. However we will need to update the CTL file for sure - you have either a missing or wrong CTL on the phone.
     
  17. nickybrg

    nickybrg Well-Known Member
    3CX Staff

    Joined:
    Jun 7, 2007
    Messages:
    1,621
    Likes Received:
    15
    for me this is the way to go about it:

    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801ed394_4container_ccmigration_09186a0080255f67.html#wp1029141

    the whole pdf is the following : Cisco IP Phone Authentication and Encryption for Cisco CallManager 4.0(1)

    i think that this will resolve the issue - you also need some "security tokens" from another CTL file. everything is explained in this pdf.
     
  18. riceboi

    Joined:
    Apr 11, 2007
    Messages:
    17
    Likes Received:
    0
    hi richie,

    i've pasted a copy of my sample config if you'd like to give it a go.
    just replace all ip addresses and the SIP user/pass details & loadinformation to match your configuration and then give it ago.

    else i can email it to you, just pm me your email addres.

    Cheers.

    <device>
    <deviceProtocol>SIP</deviceProtocol>
    <sshUserId>root</sshUserId>
    <sshPassword>root</sshPassword>

    <devicePool>
    <dateTimeSetting>
    <dateTemplate>D/M/YA</dateTemplate>
    <timeZone>West Pacific Standard Time</timeZone>
    <ntps>
    <ntp>
    <name>128.250.36.2</name>
    <ntpMode>Unicast</ntpMode>
    </ntp>
    <ntp>
    <name>129.78.64.10</name>
    <ntpMode>Unicast</ntpMode>
    </ntp>
    </ntps>
    </dateTimeSetting>
    <callManagerGroup>
    <members>
    <member priority="0">
    <callManager>
    <ports>
    <ethernetPhonePort>2000</ethernetPhonePort>
    <sipPort>5060</sipPort>
    <securedSipPort>5061</securedSipPort>
    </ports>
    <processNodeName>192.168.21.6</processNodeName>
    </callManager>
    </member>
    </members>
    </callManagerGroup>
    </devicePool>

    <sipProfile>
    <sipProxies>
    <registerWithProxy>true</registerWithProxy>
    </sipProxies>
    <sipCallFeatures>
    <cnfJoinEnabled>true</cnfJoinEnabled>
    <callForwardURI>x-cisco-serviceuri-cfwdall</callForwardURI>
    <callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>
    <callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>
    <callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>
    <meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>
    <abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>
    <rfc2543Hold>false</rfc2543Hold>
    <callHoldRingback>2</callHoldRingback>
    <localCfwdEnable>true</localCfwdEnable>
    <semiAttendedTransfer>true</semiAttendedTransfer>
    <anonymousCallBlock>2</anonymousCallBlock>
    <callerIdBlocking>2</callerIdBlocking>
    <dndControl>0</dndControl>
    <remoteCcEnable>true</remoteCcEnable>
    </sipCallFeatures>
    <sipStack>
    <sipInviteRetx>6</sipInviteRetx>
    <sipRetx>10</sipRetx>
    <timerInviteExpires>180</timerInviteExpires>
    <timerRegisterExpires>3600</timerRegisterExpires>
    <timerRegisterDelta>5</timerRegisterDelta>
    <timerKeepAliveExpires>120</timerKeepAliveExpires>
    <timerSubscribeExpires>120</timerSubscribeExpires>
    <timerSubscribeDelta>5</timerSubscribeDelta>
    <timerT1>500</timerT1>
    <timerT2>4000</timerT2>
    <maxRedirects>70</maxRedirects>
    <remotePartyID>true</remotePartyID>
    <userInfo>None</userInfo>
    </sipStack>
    <autoAnswerTimer>1</autoAnswerTimer>
    <autoAnswerAltBehavior>false</autoAnswerAltBehavior>
    <autoAnswerOverride>true</autoAnswerOverride>
    <transferOnhookEnabled>false</transferOnhookEnabled>
    <enableVad>false</enableVad>
    <preferredCodec>g729a</preferredCodec>
    <dtmfAvtPayload>101</dtmfAvtPayload>
    <dtmfDbLevel>3</dtmfDbLevel>
    <dtmfOutofBand>avt</dtmfOutofBand>
    <alwaysUsePrimeLine>false</alwaysUsePrimeLine>
    <alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail>
    <kpml>3</kpml>
    <phoneLabel>0294361281</phoneLabel>
    <stutterMsgWaiting>2</stutterMsgWaiting>
    <callStats>false</callStats>
    <silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>
    <startMediaPort>16384</startMediaPort>
    <stopMediaPort>32766</stopMediaPort>

    <sipLines>
    <line button="1">
    <featureID>9</featureID>
    <featureLabel>Study 211</featureLabel>
    <proxy>192.168.21.6</proxy>
    <port>5060</port>
    <name>211</name>
    <displayName>Study</displayName>
    <autoAnswer>
    <autoAnswerEnabled>2</autoAnswerEnabled>
    </autoAnswer>
    <callWaiting>1</callWaiting>
    <authName>211</authName>
    <authPassword>211</authPassword>
    <sharedLine>false</sharedLine>
    <messageWaitingLampPolicy>1</messageWaitingLampPolicy>
    <messagesNumber>999</messagesNumber>
    <ringSettingIdle>4</ringSettingIdle>
    <ringSettingActive>5</ringSettingActive>
    <contact>211</contact>
    <forwardCallInfoDisplay>
    <callerName>true</callerName>
    <callerNumber>false</callerNumber>
    <redirectedNumber>false</redirectedNumber>
    <dialedNumber>true</dialedNumber>
    </forwardCallInfoDisplay>
    </line>
    <line button="3">
    <featureID>21</featureID>
    <featureLabel>Lounge</featureLabel>
    <speedDialNumber>212</speedDialNumber>
    </line>
    <line button="4">
    <featureID>21</featureID>
    <featureLabel>Sunroom</featureLabel>
    <speedDialNumber>213</speedDialNumber>
    </line>
    <line button="5">
    <featureID>21</featureID>
    <featureLabel>Cordless</featureLabel>
    <speedDialNumber>214</speedDialNumber>
    </line>
    <line button="7">
    <featureID>21</featureID>
    <featureLabel>Dads Mobile</featureLabel>
    <speedDialNumber>0</speedDialNumber>
    </line>
    <line button="8">
    <featureID>21</featureID>
    <featureLabel>Mums Mobile</featureLabel>
    <speedDialNumber>0</speedDialNumber>
    </line>
    </sipLines>

    <voipControlPort>5060</voipControlPort>
    <dscpForAudio>184</dscpForAudio>
    <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>
    <dialTemplate>dialplan.xml</dialTemplate>
    </sipProfile>

    <commonProfile>
    <phonePassword></phonePassword>
    <backgroundImageAccess>true</backgroundImageAccess>
    <callLogBlfEnabled>2</callLogBlfEnabled>
    </commonProfile>

    <loadInformation>SIP70.8-0-2SR1S</loadInformation>

    <vendorConfig>
    <disableSpeaker>false</disableSpeaker>
    <disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
    <pcPort>0</pcPort>
    <settingsAccess>1</settingsAccess>
    <garp>0</garp>
    <voiceVlanAccess>0</voiceVlanAccess>
    <videoCapability>0</videoCapability>
    <autoSelectLineEnable>0</autoSelectLineEnable>
    <webAccess>1</webAccess>
    <daysDisplayNotActive>2,3,4,5,6</daysDisplayNotActive>
    <displayOnTime>08:00</displayOnTime>
    <displayOnDuration>14:00</displayOnDuration>
    <displayIdleTimeout>00:10</displayIdleTimeout>
    <spanToPCPort>1</spanToPCPort>
    <loggingDisplay>1</loggingDisplay>
    <loadServer></loadServer>
    </vendorConfig>

    <versionStamp>1136931633-57191cee-5ffc-4342-b286-4246b4991890</versionStamp>

    <networkLocale>United_Kingdom</networkLocale>
    <networkLocaleInfo>
    <name>United_Kingdom</name>
    <uid>64</uid>
    <version>1.0.0.0-1</version>
    </networkLocaleInfo>

    <deviceSecurityMode>1</deviceSecurityMode>
    <authenticationURL></authenticationURL>
    <directoryURL>http://192.168.21.6/directory.xml</directoryURL>
    <idleURL></idleURL>
    <informationURL></informationURL>
    <messagesURL></messagesURL>
    <proxyServerURL></proxyServerURL>
    <servicesURL>http://192.168.21.6/services.xml</servicesURL>
    <dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>
    <dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
    <dscpForCm2Dvce>96</dscpForCm2Dvce>
    <transportLayerProtocol>4</transportLayerProtocol>
    <capfAuthMode>0</capfAuthMode>
    <capfList>
    <capf>
    <phonePort>3804</phonePort>
    <processNodeName>ccm-beta-5-1</processNodeName>
    </capf>
    </capfList>

    <certHash></certHash>
    <encrConfig>false</encrConfig>
    </device>
     
  19. richie314nj

    Joined:
    Jun 22, 2007
    Messages:
    19
    Likes Received:
    0
    Thanks guys.
    I'll check out the PDF and look at the other sample config file.

    I'll let you know how I make out.

    By the way what SIP firmware version are you all using?
    Mine: sip.8-2-2SR4
     

Share This Page