Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

Cisco 7960

Discussion in 'Windows' started by max@zl2max.gen.nz, Mar 5, 2011.

Thread Status:
Not open for further replies.
  1. max@zl2max.gen.nz

    Joined:
    Mar 3, 2011
    Messages:
    4
    Likes Received:
    0
    Hi Guys

    one of my Ciscos 7960, dosn't work, can't get anything from the key pad...

    Stick it on its own subnet on its own and you can ping it, but not telnet ...

    Is there some sort of master reset I can use to default it ??


    Thanks

    Max
     
  2. abc123

    abc123 Active Member

    Joined:
    Nov 9, 2009
    Messages:
    712
    Likes Received:
    1
    There is often a factory reset for cisco but from a dial code or the phone interface, which may not help in your case.

    I cant help you as we avoid these phones (we enjoy the easy life :) )
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. Sha1a

    Joined:
    May 18, 2011
    Messages:
    15
    Likes Received:
    0
    Try pressing..

    * 6 and the settings button at the same time until Headset button lights up, release and press #. It will then display "re-set key sequence detected" when you see this press in order 123456789*0#. It will then ask if you would like to keep settings. Choose 2-No. Will then re-set to shipped defaults and firmware.

    Hope this helps.
     
  4. davidbenwell

    davidbenwell Active Member

    Joined:
    Apr 27, 2010
    Messages:
    704
    Likes Received:
    0
    solution to your problem
    Install TFTP Server and reload the firmware & the configuration files.

    we had the same issue on a 7940 and this did the trick.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
Thread Status:
Not open for further replies.