Cisco IP Phone CP-8941 and 3CX for Windows

Discussion in 'Windows' started by eurois, Feb 18, 2016.

Thread Status:
Not open for further replies.
  1. eurois

    Joined:
    Feb 18, 2016
    Messages:
    1
    Likes Received:
    0
    Hello,
    I am doing some test on a 3CX System for Windows and I want to know if the IP PHone from CISCO CP-8941 is supported?
    And if it is supported if there is a procedure to be able to use it with 3CX for Windows.

    Thanks in advance for your help and your reply ;)
     
  2. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,861
    Likes Received:
    302
    If there is no template for auto configuration, then it's not (officially) supported. This doesn't necessarily mean it won't work, just that , at this point, you are an you own. Cisco sets are notorious for making things difficult when trying to use them with anything other than a Cisco system. Do some internet searches, on "standard" SIP compatibility, before spending a lot of time trying to get it to work.
     
Thread Status:
Not open for further replies.