Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

Configure 3CX to support cisco ip phone 7911

Discussion in 'Windows' started by patrickiso, Dec 2, 2013.

Thread Status:
Not open for further replies.
  1. patrickiso

    Joined:
    Nov 30, 2013
    Messages:
    1
    Likes Received:
    0
    I'm on a project that took me two months already , I really need help to continue. Here is my problem . I have a cisco ip phone 7911 which came with SCCP firmware . Not having cisco unified call manager I chose 3CX ( a demo version) for testing before buying the license. I was able to set up a SIP firmware ( 8.2.2 ) on my phone after weeks and weeks of research . Currently the firmware is installed and I have the tone on my phone . But the problem is that the phone can not s record on the 3CX server and make its extension. After research I noticed that 3CX support cisco ip phone 7940/7960 but not 7911 . I also compressed we could configure 3CX for it to support the 7911 phone .

    HERE IS THE PATTERN OF 7960 THAT I FOUND IN THE 3CX . HOW CAN I CHANGE THE ORDER THAT THE 3CX SUPPORTED MY PHONE 7911 . PLEASE REPLY ME . I MUCH ON ACCOUNT YOUR HELP .

    {\rtf1\ansi\ansicpg1252\cocoartf1265
    {\fonttbl\f0\fswiss\fcharset0 Helvetica;}
    {\colortbl;\red255\green255\blue255;}
    \margl1440\margr1440\vieww16740\viewh12580\viewkind0
    \pard\tx566\tx1133\tx1700\tx2267\tx2834\tx3401\tx3968\tx4535\tx5102\tx5669\tx6236\tx6803\pardirnatural

    \f0\fs24 \cf0 <?xml version="1.0"?>\
    <doc xmlns:tcx="http://www.3cx.com">\
    <header>\
    <type>phone-template</type>\
    <version>33517</version>\
    <time>2012-12-12 09:00:00</time>\
    <name>Cisco 7940</name>\
    <url>http://www.cisco.com</url>\
    <models>\
    <model ua="Cisco-CP7940G">Cisco 7940</model>\
    <model ua="Cisco-CP7941G">Cisco 7941</model>\
    <model ua="Cisco-CP7960G">Cisco 7960</model> \
    <model ua="Cisco-CP7961G">Cisco 7961</model> \
    </models>\
    <description>Cisco SCCP SIP Phones</description>\
    <parsers>\
    <parser>BLF</parser>\
    </parsers>\
    <rebootParams>\
    </rebootParams>\
    <resyncParams>\
    </resyncParams>\
    <firmwareParams>\
    </firmwareParams>\
    <AllowedNetworkConfig>\
    <option value="LOCALLAN">1</option>\
    <option value="REMOTESTUN">0</option>\
    <option value="REMOTESPM">0</option>\
    </AllowedNetworkConfig>\
    <dst variableName="dstEnableDisable" enable="1" disable="0">\
    </dst>\
    <languages>\
    <!--The first entry is the selected entry in management console-->\
    <option value="English">\
    <item name="langwebUI">English</item>\
    <item name="langlcdUI">English</item>\
    </option>\
    </languages>\
    <timezoneParams param="time_timezone_linksys">\
    <!--The first entry is the selected entry in management console--> \
    <option value="GMT">GMT(London, Dublin, Edinburgh, Lisbon, Casablanca, Monrovia)</option>\
    <option value="CET">GMT+1:00 (Paris,Amsterdam, Berlin, Rome, Vienna, Madrid, Warsaw, Brussels)</option>\
    <option value="EET">GMT+2:00 (Israel, Cairo, Athens, Helsinki, Istanbul, Buchrest)</option>\
    <option value="BT">GMT+3:00 (Moscow, Kuwait, Baghdad, Tehran, Nairobi)</option>\
    <option value="IT">GMT+3:30 (Tehran)</option>\
    <option value="ZP4">GMT+4:00 (Abu Dhabi, Yerevan, Baku)</option>\
    <option value="AFG">GMT+4:30 (Kabul)</option>\
    <option value="ZP5">GMT+5:00 (Islamabad, Ekaterinburg, Karachi, Tashkent)</option>\
    <option value="IST">GMT+5:30 (Chennai, New Delhi, Mumbai)</option>\
    <option value="ZP6">GMT+6:00 (Almaty, Astana. Dhaka, Novosibirsk)</option>\
    <option value="SUM">GMT+6:30 (North Sumatra)</option>\
    <option value="WAST">GMT+7:00 (Bankok, Jakarta, Hanoi, Krasnoyarsk)</option>\
    <option value="HST">GMT+8:00 (Beijing, Singapore, Taipei, Kuala Lumpur, Irkutsk, Perth)</option>\
    <option value="JST">GMT+9:00 (Japan, Korea, Yakutsk)</option>\
    <option value="CAST">GMT+9:30 (Adelaide, Darwin)</option>\
    <option value="EAST">GMT+10:00 (Brisbane, Sydney, Melbourne, Canberra, Guam, Hobart)</option>\
    <option value="EADT">GMT+11:00 (Magadan, Solomon Is., New Caledonia)</option>\
    <option value="NZST">GMT+12:00 (Auckland, Wellington, Fiji)</option>\
    <option value="IDL">GMT-12:00 (International Date Line West)</option>\
    <option value="NT">GMT-11:00 (Midway Island, Samoa)</option>\
    <option value="AHST">GMT-10:00 (US Hawaiian Time)</option>\
    <option value="IMT">GMT-9:30 (Isle Marquises)</option>\
    <option value="YST">GMT-9:00 (US Alaska Time)</option>\
    <option value="PST">GMT-8:00 (US Pacific Time, Los Angeles)</option>\
    <option value="MST">GMT-7:00 (US Mountain Time, Denver)</option>\
    <option value="CST">GMT-6:00 (US Central Time, Chicago)</option>\
    <option value="EST">GMT-5:00 (US Eastern Time, New York)</option>\
    <option value="AST">GMT-4:00 (Atlantic Time, Quebec)</option>\
    <option value="NST">GMT-3:30 (Newfoundland)</option>\
    <option value="BST">GMT-3:00 (Greenland)</option>\
    <option value="AT">GMT-2:00 (Mid-Atlantic)</option>\
    <option value="WAT">GMT-1:00 (Azores, Cape Verdi Is.)</option>\
    </timezoneParams>\
    <Codecspriorities>\
    <Codecspriority variableName="codec1" PayloadTypeName="payload1" priority="1">\
    <!--The first entry is the selected entry in management console. codec1 will be replaced by value, payload1 will be replaced by payload-->\
    <option value="g711ulaw" payload="g711ulaw">G711U</option>\
    <option value="g711alaw" payload="g711alaw">G711A</option>\
    <option value="g729a" payload="g729a">G729</option>\
    </Codecspriority>\
    <Codecspriority variableName="codec2" PayloadTypeName="payload2" priority="2">\
    <!--The first entry is the selected entry in management console-->\
    <option value="8" payload="PCMA">N/A</option>\
    </Codecspriority>\
    <Codecspriority variableName="codec3" PayloadTypeName="payload3" priority="3">\
    <!--The first entry is the selected entry in management console-->\
    <option value="9" payload="G722">N/A</option>\
    </Codecspriority>\
    <Codecspriority variableName="codec4" PayloadTypeName="payload4" priority="4">\
    <!--The first entry is the selected entry in management console-->\
    <option value="18" payload="G729">N/A</option>\
    </Codecspriority>\
    </Codecspriorities>\
    </header>\
    <blftype>\
    </blftype>\
    <data>\
    <device>\
    <type>phone</type>\
    <!-- Friendly Name -->\
    <field name="Name">Cisco 7940 Gobal</field>\
    <deviceconfig filename="SIPDefault.cnf">\
    <filename>\
    <model name="Cisco7940" filename="SIPDefault.cnf" />\
    </filename>\
    <![CDATA[\
    #Fimrware Version SIP for Cisco 7940\
    image_version: P0S3-8-12-00\
    \
    #Setting for 3CX Phone System Server\
    proxy1_address: %%pbx_ip%%\
    proxy_register: 1\
    proxy1_port: %%param::sipport%%\
    timer_register_expires: "900"\
    \
    # Outbound Proxy\
    outbound_proxy: ""\
    outbound_proxy_port: ""\
    \
    #Vox Number\
    messages_uri: "%%vm_number%%"\
    \
    #DTMF Mode\
    dtmf_inband: "1"\
    dtmf_db_level: "3"\
    \
    #Dialing\
    dialedNumber: "true"\
    \
    #Setting for Timezone and DST, Option GMT,CET,EET,BT,IT,ZP4,AFG,ZP5,IST,ZP6,SUM,WAST,HST,JST,CAST,EAST,EADT,NZST,IDL,NT,AHST,IMT,YST,PST,MST,CST,EST,AST,NST,BST,AT,WAT\
    sntp_server: "%%param::time_ntp_server%%"\
    sntp_mode: unicast\
    time_zone: "%%param::time_timezone_linksys%%"\
    dst_offset: 1\
    dst_start_month: March\
    dst_start_day_of_week: Sun\
    dst_start_week_of_month: 8\
    dst_start_time: 01\
    dst_stop_month: Oct\
    dst_stop_day_of_week: Sun\
    dst_stop_week_of_month: 8\
    dst_stop_time: 02\
    dst_auto_adjust: 1\
    time_format_24hr: 1\
    date_format : M/D/Y\
    \
    # Allow Transfer to be completed while target phone is still ringing (Options: 0-Disabled, 1-Enabled)\
    semi_attended_transfer: "1"\
    \
    ]]></deviceconfig>\
    </device>\
    </data>\
    <data>\
    <device>\
    <type>phone</type>\
    <!-- Friendly Name -->\
    <field name="Name">Cisco 7940 Device Config</field>\
    <deviceconfig filename="SIP%%mac_address%%.cnf">\
    <![CDATA[\
    #Line 1 Setting\
    line1_name: "%%extension_number%%"\
    line1_authname: "%%extension_auth_id%%"\
    line1_displayname: "%%extension_first_name%% %%extension_last_name%%"\
    line1_password: "%%extension_auth_pw%%"\
    line1_shortname: "%%extension_first_name%% %%extension_last_name%%"\
    \
    #Line 2 Setting\
    line2_name: "%%extension_number%%"\
    line2_authname: "%%extension_auth_id%%"\
    line2_displayname: "%%extension_first_name%% %%extension_last_name%%"\
    line2_password: "%%extension_auth_pw%%"\
    line2_shortname: "%%extension_first_name%% %%extension_last_name%%"\
    \
    \{IF ua=Cisco-CP7960G\}\
    #Line 3 Setting\
    line3_name: "%%extension_number%%"\
    line3_authname: "%%extension_auth_id%%"\
    line3_displayname: "%%extension_first_name%% %%extension_last_name%%"\
    line3_password: "%%extension_auth_pw%%"\
    line3_shortname: "%%extension_first_name%% %%extension_last_name%%"\
    \
    #Line 4 Setting\
    line4_name: "%%extension_number%%"\
    line4_authname: "%%extension_auth_id%%"\
    line4_displayname: "%%extension_first_name%% %%extension_last_name%%"\
    line4_password: "%%extension_auth_pw%%"\
    line4_shortname: "%%extension_first_name%% %%extension_last_name%%"\
    \
    #Line 5 Setting\
    line5_name: "%%extension_number%%"\
    line5_authname: "%%extension_auth_id%%"\
    line5_displayname: "%%extension_first_name%% %%extension_last_name%%"\
    line5_password: "%%extension_auth_pw%%"\
    line5_shortname: "%%extension_first_name%% %%extension_last_name%%"\
    \
    #Line 6 Setting\
    line6_name: "%%extension_number%%"\
    line6_authname: "%%extension_auth_id%%"\
    line6_displayname: "%%extension_first_name%% %%extension_last_name%%"\
    line6_password: "%%extension_auth_pw%%"\
    line6_shortname: "%%extension_first_name%% %%extension_last_name%%" \
    \{ENDIF\}\
    \
    \{IF ua=Cisco-CP7961G\}\
    #Line 3 Setting\
    line3_name: "%%extension_number%%"\
    line3_authname: "%%extension_auth_id%%"\
    line3_displayname: "%%extension_first_name%% %%extension_last_name%%"\
    line3_password: "%%extension_auth_pw%%"\
    line3_shortname: "%%extension_first_name%% %%extension_last_name%%"\
    \
    #Line 4 Setting\
    line4_name: "%%extension_number%%"\
    line4_authname: "%%extension_auth_id%%"\
    line4_displayname: "%%extension_first_name%% %%extension_last_name%%"\
    line4_password: "%%extension_auth_pw%%"\
    line4_shortname: "%%extension_first_name%% %%extension_last_name%%"\
    \
    #Line 5 Setting\
    line5_name: "%%extension_number%%"\
    line5_authname: "%%extension_auth_id%%"\
    line5_displayname: "%%extension_first_name%% %%extension_last_name%%"\
    line5_password: "%%extension_auth_pw%%"\
    line5_shortname: "%%extension_first_name%% %%extension_last_name%%"\
    \
    #Line 6 Setting\
    line6_name: "%%extension_number%%"\
    line6_authname: "%%extension_auth_id%%"\
    line6_displayname: "%%extension_first_name%% %%extension_last_name%%"\
    line6_password: "%%extension_auth_pw%%"\
    line6_shortname: "%%extension_first_name%% %%extension_last_name%%" \
    \{ENDIF\}\
    \
    #Default Codec\
    preferred_codec: %%codec1%%\
    \
    #3CX Phone System Tbook max 32 entries\
    directory_url: "http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/%%PROVSUBDIR%%/cisco_phonebook.xml"\
    \
    #3CX Logo\
    logo_url: "http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/%%PROVSUBDIR%%/logo/cisco9740.bmp"\
    \
    # NAT/Firewall Traversal\
    nat_enable: "0"\
    nat_address: ""\
    voip_control_port: "5060"\
    start_media_port: "16384"\
    end_media_port: "32766"\
    nat_received_processing: "0"\
    \
    # Display Name of Phone in right upper conrner\
    phone_label: "ID %%extension_number%%__"\
    \
    # Remote Debugging via Telnet (0-Disabled, 1-Enabled, 2-Privileged)\
    telnet_level: "2"\
    phone_prompt: "3CXPhoneSystem"\
    phone_password: "cisco"\
    ]]></deviceconfig>\
    </device>\
    </data>\
    </doc>}
     
Thread Status:
Not open for further replies.