Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

DID for incoming call

Discussion in '3CX Phone System - General' started by joe508, Dec 11, 2013.

Thread Status:
Not open for further replies.
  1. joe508

    Joined:
    Dec 11, 2013
    Messages:
    1
    Likes Received:
    0
    Dear all,

    I had just setup the 3cx server and link up with some Cisco SPA phone, now I can call in by the main number, but can't call in by the DID number, I've got this log when i call one of the DID number (from my mobile 77777777 cal DID number 98765068:


    11-Dec-2013 19:10:35.686 [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
    Invite-UNK Recv Req INVITE from 2.2.2.2:5060 tid=xukxl8icvi8hh8bjn8yhoohyv Call-ID=SBCnjwewivgtkutwanatuxgkujgniogmank@SoftX3000:
    INVITE sip:98765068@1.1.1.1:5060;user=phone SIP/2.0
    Via: SIP/2.0/UDP 2.2.2.2:5060;branch=z9hG4bKxukxl8icvi8hh8bjn8yhoohyv
    Max-Forwards: 70
    Contact: <sip:77777777@2.2.2.2:5060;user=phone>
    To: <sip:98765068@1.1.1.1;user=phone>
    From: <sip:77777777@2.2.2.2;user=phone>;tag=uxjnoxol-CC-22
    Call-ID: SBCnjwewivgtkutwanatuxgkujgniogmank@SoftX3000
    CSeq: 1 INVITE
    Allow: INVITE, ACK, OPTIONS, BYE, CANCEL, REGISTER, INFO, PRACK, SUBSCRIBE, NOTIFY, UPDATE, MESSAGE, REFER
    Content-Type: application/sdp
    Supported: 100rel
    User-Agent: Huawei SoftX3000 V300R010
    Content-Length: 202

    v=0
    o=HuaweiSoftX3000 36440265 36440265 IN IP4 2.2.2.2
    s=Sip Call
    c=IN IP4 2.2.2.2
    t=0 0
    m=audio 16602 RTP/AVP 0 97
    a=rtpmap:0 PCMU/8000
    a=rtpmap:97 telephone-event/8000
    a=fmtp:97 0-15


    So anyone can help?

    Here my SIP provider information:
    Provider: Wharf TT from Hong Kong
    SIP proxy: 2.2.2.2
    3cx Server IP: 1.1.1.1
    DID number: 98765000-98765099
    DID digi sent by provider: As my understanding, it should be 8, but really not sure

    Many many thanks.

    Joe
     
  2. jpillow

    jpillow Well-Known Member

    Joined:
    Jun 20, 2011
    Messages:
    1,342
    Likes Received:
    0
    You should go to fthe management console --->VoIP providers tab---> source ID---->Add DID tab---> assure your DID is listed there along with any others and check the select all box, as well as check the source identification by DID box. post what your results are
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
Thread Status:
Not open for further replies.