DND sends all incoming calls to digital receptionist

Discussion in '3CX Phone System - General' started by tm19, Jan 27, 2011.

Thread Status:
Not open for further replies.
  1. tm19

    Joined:
    Sep 3, 2009
    Messages:
    5
    Likes Received:
    0
    We have Linksys SPA942 phones. It's very easy to accidentally press the DND soft button. The real problem is this: When one of the phones is set to DND, the whole system seems to be set on DND. Every caller is sent straight to the digital receptionist. We have to hunt around the building looking for an extension with "-DND" on the display, turn it off, and get back to business.

    Where have we gone wrong in our 3cx setup? Shouldn't it be possible to set things up so that only the DND'd phone is affected?

    [I realize there have been lots of forum posts on DND, but I couldn't find one with this particular problem.]

    Thanks,
    - Trevor
     
  2. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,744
    Likes Received:
    281
    Have a look at the 3CX log (in Verbose if possible), Hit the DND button to cause the issue to occur, have someone call in, does it show any reason why the call is being routed to the DR. Are all of the affected extensions a part of one ring group or queue?
     
Thread Status:
Not open for further replies.