epygi isdn quadro and 3cx

Discussion in '3CX Phone System - General' started by equintana, Dec 23, 2010.

Thread Status:
Not open for further replies.
  1. equintana

    Joined:
    Dec 20, 2010
    Messages:
    57
    Likes Received:
    0
    Hi,

    I have this problem configuring my epygi and 3cx for in and out calls.

    I have 4 isdn lines and this epygi device. 3cx configured and some cisco 504g ip phones. Internal phone calls work perfect but when I try to phone tu an isdn number:

    21-dic-2010 18:31:51 PSTN0/1-0xxxxxxxxxxxx(system/CR) isdn_number@192.168.157.134:5060 "User Not Found".

    xxxxxxxxxx is my personal phone.
    192.168.157.134 is the 3cx server ip

    Also, when I use the ip phone and try to phone my personal number a message is shown "invalid number"

    I follow this post http://www.3cx.com/forums/configuring-epygi-quadro-isdn-17202.html

    What is wrong?

    regards and merry christmas
     
Thread Status:
Not open for further replies.