Exchange 2007 Voicemail 403 Forbidden

Discussion in '3CX Phone System - General' started by jingram, Sep 25, 2007.

  1. jingram

    Joined:
    Sep 25, 2007
    Messages:
    7
    Likes Received:
    0
    We are just now getting around to testing Exchange 2007 Integration and this is what we are getting. We followed the steps outlined by your documentation. Here is a copy of what the PBX is showing:

    11:48:01.359 CallConf::Rejected [CM103005] Call(2) is rejected: Forbidden
    11:48:01.359 StratInOut::eek:nCancel [CM104008] Call(2): Call from Ext.100 to 999 terminated; cause: 403 Forbidden; from IP:192.168.xxx.xxx
    11:48:01.328 CallConf::eek:nProvisional [CM103003] Call(2): MSExchIVR.SpecMenu(999) is ringing
    11:48:01.141 CallConf::eek:nIncoming [CM103002] Call(2): Incoming call from 100 (Ext.100) to sip:999@pbx.xxxxx.com
     
  2. Anonymous

    Anonymous Guest

    Have you configured the voicemail in unified messaging for the user? It needs a password etc.
     
  3. jingram

    Joined:
    Sep 25, 2007
    Messages:
    7
    Likes Received:
    0
    Yep, sure did. After all that is part of the setup process. I don't even get that far. It disconnects almost instantly upon dialing 999. Doesn't even prompt for a password.
     
  4. BendyMetal

    Joined:
    Oct 8, 2007
    Messages:
    36
    Likes Received:
    0
    mmm, me too

    Yeh, that's exactly my experience too.

    Exchange 2007 says something about an enterprise CAL for exchange 2007 - I don't have any of these - but I was interested in seeing how far I could get.

    I'm going to carry on looking around - so i'll let you know how i get on!

    Out of interest, did you solve it?
     

Share This Page