Extention to Extention dialing with a Tribox

Discussion in '3CX Phone System - General' started by nictwo2269, Jan 18, 2012.

Thread Status:
Not open for further replies.
  1. nictwo2269

    Joined:
    Jan 18, 2012
    Messages:
    8
    Likes Received:
    0
    They had Zultys in there main office and tribox in there hong kong location. They were about to say pickup the phone on the tribox and dial *547 and it would connect to extension 547 on the zultys box. I was wandering does anyone have any ideas how to accomplish this with 3cx we have replaced the zultys box.

    I know before it was handled by connecting the 2 like one was a sip server then routing the calls internal instead of extenal.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  2. danhriscanu

    danhriscanu New Member

    Joined:
    Nov 29, 2011
    Messages:
    232
    Likes Received:
    0
    Hi,

    You should make a bridge, if you have VPN, or a tunnel between those 2 pbx, one acting as master to accept registration and the other acting as slave. After you make this working you can make calls between those 2 pbx according to your outbound rules.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
Thread Status:
Not open for further replies.