External extentions call rejected user unknow

Discussion in '3CX Phone System - General' started by rorygennaro, Dec 11, 2007.

Thread Status:
Not open for further replies.
  1. rorygennaro

    Joined:
    Nov 7, 2007
    Messages:
    11
    Likes Received:
    0
    With x-lite but also with 3cx and 3cx voip client I registered one external extention and it can receive calls from 3cx bun when it call to another extention the server reply:
    [CM503011]: Call(4): Incoming call rejected, caller is unknown; msg=SipReq: INVITE 201@82.104.76.230 tid=112d406897003b04 cseq=INVITE contact=208@217.221.45.75:9000 / 2 from(wire)

    and the call is rejected.
     
  2. mbs1

    Joined:
    Mar 7, 2007
    Messages:
    35
    Likes Received:
    0
    hi,

    in xlite, in the accounts setting, set the domain field to the internal ip address of the 3cx pbx.

    this should do the trick.

    i have done the same and can confirm that setting up xlite as a remote extension on v5 does work

    mbs
     
  3. rorygennaro

    Joined:
    Nov 7, 2007
    Messages:
    11
    Likes Received:
    0
    Ok just do it.

    In 3CX I must check deliver audio to pbx ??
     
  4. jr3151006

    jr3151006 New Member

    Joined:
    Jul 30, 2010
    Messages:
    155
    Likes Received:
    0
    I face the same issue using '3cx phone for Windows' to connected an (external) extension to 3cx v10 and fixed after set to use tunnel option!

    * the guide: http://www.3cx.com/VOIP/ip-phone-help/LAN-PBX.html

    Renato P
     

    Attached Files:

    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
Thread Status:
Not open for further replies.