Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

External SIP Extension Rings on direct Sip calls but hangs up immediately when picked up

Discussion in '3CX Phone System - General' started by Thomas6, Sep 19, 2017.

Thread Status:
Not open for further replies.
  1. Thomas6

    Joined:
    Sep 19, 2017
    Messages:
    1
    Likes Received:
    0
    External SIP Extension Rings on direct Sip calls but hangs up immediately when picked up

    My Infrastructure:

    3CX PBX Edition 15.5.5 installed from debian-8.6.0-amd64-netinst-3cx.iso
    with all Updates

    3CX Softphone on iOS

    ---------------------------------------------------------------------------------
    DNS Server is on the same System

    Im not sure if my dns configuration is correct.

    this is the entry in the dnszone file.
    _______________________________________________
    ; BIND reverse data file for empty rfc1918 zone
    ; DO NOT EDIT THIS FILE - it is used for multiple zones.
    ; Instead, copy it, edit named.conf, and use that copy.
    ;
    $TTL 86400

    @ IN SOA debian.local. root.localhost. (
    1 ; Serial
    604800 ; Refresh
    86400 ; Retry
    2419200 ; Expire
    86400 ) ; Negative Cache TTL
    ;
    IN A 10.0.1.253
    @ IN NS localhost.
    sip.debian.local IN A 10.0.1.253
    _sip._udp.debian.local. IN SRV 20 1 5060 sip.debian.local.

    __________________________________________________________


    the respons from nslookup is:
    ____________________________________
    nslookup -q=SRV _sip._udp.debian.local
    Server: 127.0.0.1
    Address: 127.0.0.1#53

    _sip._udp.debian.local service = 20 1 5060 sip.debian.local.
    _________________________________________________

    The sip settings in the 3cx system allows in and out

    Networksettings SIP 3cx System.png


    I get alway the following error message: (Register/ Unregister)

    Register:Unregister.png

    Does anyone knows how to solve this problem.

    Best Regards Thomas
     
Thread Status:
Not open for further replies.