Failed Inbound Calls

Discussion in '3CX Phone System - General' started by Micro1, Jul 18, 2007.

  1. Micro1

    Joined:
    Jul 17, 2007
    Messages:
    6
    Likes Received:
    0
    I keep getting the following in the server log.

    17:34:25.281 CallConf::eek:nIncoming [CM003002] Call(20): Destination not available for call from sip:10807@192.168.1.250 to sip:10807@192.168.1.249
    17:34:25.281 CallConf::Rejected [CM103005] Call(20) is rejected: Destination does not exist, or is not registered
    17:34:25.281 CallConf::eek:nIncoming [CM103002] Call(20): Incoming call from 10807 (Ln:10807@AudioCodes MP-118) to sip:10807@192.168.1.249

    Not sure where to go from here.
     
  2. ess

    ess New Member

    Joined:
    Jun 8, 2007
    Messages:
    133
    Likes Received:
    0
    I know you have probably used this already, but just so we are on the same page did you follow this guide?

    http://www.3cx.com/voip-gateways/audiocodes-mp.html

    Specifically, did you make sure Autodial is on? I don't know much about the audiocodes equipment.
     

Share This Page