fax problems

Discussion in '3CX Phone System - General' started by UdoBo, Feb 14, 2008.

  1. UdoBo

    Joined:
    Dec 10, 2007
    Messages:
    5
    Likes Received:
    0
    11:35:27.859 Call::Terminate [CM503008]: Call(2): Call is terminated
    11:35:27.828 LineCfg::getInboundTarget [CM503011]: Inbound office hours' rule for LN:10001 forwards to DN:
    11:35:27.687 LineCfg::getInboundTarget [CM503011]: Inbound office hours' rule for LN:10001 forwards to DN:
    11:35:27.562 Call::RouteFailed [CM503014]: Call(2): Attempt to reach [sip:pbx1.ath.cx:5062] failed. Reason: Not Found
    11:35:27.562 CallCtrl::eek:nSelectRouteReq [CM503013]: Call(2): No known route to target: [sip:pbx1.ath.cx:5062]
    11:35:27.406 Line::printEndpointInfo [CM505002]: Gateway:[953153] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [Patton SN4552 2BIS EUI MxSF v3.2.8.45 00A0BA0340CE R4.2 2007-12-03 SIP] Transport: [sip:192.168.101.20:5062]
    11:35:27.406 LineCfg::getInboundTarget [CM503011]: Inbound office hours' rule for LN:10001 forwards to DN:
    11:35:27.265 CallCtrl::eek:nIncomingCall [CM503001]: Call(2): Incoming call from 2163953155@(Ln.10001@953153) to [sip:pbx1.ath.cx:5062]
    11:35:27.250 LineCfg::getInboundTarget [CM503011]: Inbound office hours' rule for LN:10001 forwards to DN:

    I get no faxes , can someone help?
     
  2. asfuture

    asfuture New Member

    Joined:
    Aug 3, 2007
    Messages:
    156
    Likes Received:
    0
    He Udobo
    do you have any rule for inbound calls??? any destination?? you can define it on the line. thats very important. that the destination also exist.
     
  3. Nick Galea

    Nick Galea Site Admin

    Joined:
    Jun 6, 2006
    Messages:
    1,731
    Likes Received:
    41
    hi udo,

    Ensure you have enabled fax on the patton as per the FAQ

    Else contact our support dept, since you are partner...
     

Share This Page