Firewall Test Response received WITH TRANSLATION

Discussion in '3CX Phone System - General' started by pollardd, Feb 22, 2009.

Thread Status:
Not open for further replies.
  1. pollardd

    Joined:
    Feb 21, 2009
    Messages:
    1
    Likes Received:
    0
    Hi There,
    Firstly I'm new to 3CX but it looks like a great system.

    Secondly I'm loathed to ask this question as it seems like it would be a really common question but I can't find the answer in the help and only found one similar hit in the forum which didn't quite match my problem.

    Anyway here it is...

    I'm just running some tests to learn how it all works before I start a pilot in my office and all being well it will grow to about 25 users (who all use their phones a lot)

    I'm running Windows 2003 Server (All patched and updated)
    It is not running a firewall of any kind.

    I'm not sure what version of 3CX I’m running can't see where that is but I only downloaded it 2 days ago.

    I have a NAT firewall on my DLINK DI-624 Wireless Access point / Router.
    Which is hooked to my Cable Modem and yes I do have a dynamic IP but it almost never changes.

    I have made the port mappings as suggested in various places
    This is cut out of the Dlink Config Page.

    Name Destination IP Prot. src dest port Schedule
    VOIP SIP 192.168.0.2 Both 5060/5060 always
    VOIP TCP Tunnel 192.168.0.2 TCP 5090/5090 always
    VIOP RTP 9000 192.168.0.2 UDP 9000/9000 always
    VOIP RTP 9001 192.168.0.2 UDP 9001/9001 always
    VIOP RTP 9002 192.168.0.2 UDP 9002/9002 always
    VOIP RTP 9003 192.168.0.2 UDP 9003/9003 always
    VOIP RTP 9004 192.168.0.2 UDP 9004/9004 always
    VOIP RTP 9005 192.168.0.2 UDP 9005/9005 always
    VOIP RTP 9006 192.168.0.2 UDP 9006/9006 always
    VOIP RTP 9007 192.168.0.2 UDP 9007/9007 always
    VOIP RTP 9008 192.168.0.2 UDP 9008/9008 always
    VOIP RTP 9009 192.168.0.2 UDP 9009/9009 always
    VOIP RTP 9010 192.168.0.2 UDP 9010/9010 always
    VOIP RTP 9011 192.168.0.2 UDP 9011/9011 always
    VOIP RTP 9012 192.168.0.2 UDP 9012/9012 always
    VOIP RTP 9013 192.168.0.2 UDP 9013/9013 always
    VOIP RTP 9014 192.168.0.2 UDP 9014/9014 always
    VOIP RTP 9015 192.168.0.2 UDP 9015/9015 always


    This are the messages I receive when I run the firewall check.

    3CX Firewall Checker, v1.0. Copyright (C) 3CX Ltd. All rights reserved.

    <10:14:44>: Phase 1, checking servers connection, please wait...
    <10:14:44>: Stun Checker service is reachable. Phase 1 check passed.
    <10:14:44>: Phase 2a, Check Port Forwarding to UDP SIP port, please wait...
    <10:14:51>: UDP SIP Port is set to 5060. Response received WITH TRANSLATION 60279::5060. Phase 2a check passed with WARNINGS. Some functionality will be LIMITED. For more information, please visit http://www.3cx.com/support/firewall-checker.html

    <10:14:51>: Phase 2b. Check Port Forwarding to TCP SIP port, please wait...
    <10:14:56>: TCP SIP Port is set to 5060. Response received WITH TRANSLATION 60279::5060. Phase 2b check passed with WARNINGS. Some functionality will be LIMITED. For more information, please visit http://www.3cx.com/support/firewall-checker.html

    <10:14:56>: Phase 3. Check Port Forwarding to TCP Tunnel port, please wait...
    <10:15:01>: TCP TUNNEL Port is set to 5090. Response received WITH TRANSLATION 60292::5090. Phase 3 check passed with WARNINGS. Some functionality will be LIMITED. For more information, please visit http://www.3cx.com/support/firewall-checker.html

    <10:15:01>: Phase 4. Check Port Forwarding to RTP external port range, please wait...
    <10:15:09>: UDP RTP Port 9000. Response received WITH TRANSLATION 60293::9000. Phase 4-01 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/support/firewall-checker.html
    <10:15:14>: UDP RTP Port 9001. Response received WITH TRANSLATION 60294::9001. Phase 4-02 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/support/firewall-checker.html
    <10:15:18>: UDP RTP Port 9002. Response received WITH TRANSLATION 60295::9002. Phase 4-03 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/support/firewall-checker.html
    <10:15:23>: UDP RTP Port 9003. Response received WITH TRANSLATION 60296::9003. Phase 4-04 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/support/firewall-checker.html
    <10:15:27>: UDP RTP Port 9004. Response received WITH TRANSLATION 60297::9004. Phase 4-05 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/support/firewall-checker.html
    <10:15:32>: UDP RTP Port 9005. Response received WITH TRANSLATION 60298::9005. Phase 4-06 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/support/firewall-checker.html
    <10:15:36>: UDP RTP Port 9006. Response received WITH TRANSLATION 60299::9006. Phase 4-07 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/support/firewall-checker.html
    <10:15:41>: UDP RTP Port 9007. Response received WITH TRANSLATION 60300::9007. Phase 4-08 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/support/firewall-checker.html
    <10:15:45>: UDP RTP Port 9008. Response received WITH TRANSLATION 60301::9008. Phase 4-09 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/support/firewall-checker.html
    <10:15:50>: UDP RTP Port 9009. Response received WITH TRANSLATION 60302::9009. Phase 4-10 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/support/firewall-checker.html
    <10:15:54>: UDP RTP Port 9010. Response received WITH TRANSLATION 60303::9010. Phase 4-11 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/support/firewall-checker.html
    <10:15:59>: UDP RTP Port 9011. Response received WITH TRANSLATION 60304::9011. Phase 4-12 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/support/firewall-checker.html
    <10:16:03>: UDP RTP Port 9012. Response received WITH TRANSLATION 60305::9012. Phase 4-13 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/support/firewall-checker.html
    <10:16:08>: UDP RTP Port 9013. Response received WITH TRANSLATION 60306::9013. Phase 4-14 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/support/firewall-checker.html
    <10:16:12>: UDP RTP Port 9014. Response received WITH TRANSLATION 60307::9014. Phase 4-15 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/support/firewall-checker.html
    <10:16:17>: UDP RTP Port 9015. Response received WITH TRANSLATION 60308::9015. Phase 4-16 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/support/firewall-checker.html


    Application exit code is 19


    The big question is do I need to worry about all these warnings?

    David
     
Thread Status:
Not open for further replies.