get a dial tone instead of digital receptionist

Discussion in '3CX Phone System - General' started by kouroshmostofi, Feb 27, 2010.

Thread Status:
Not open for further replies.
  1. kouroshmostofi

    Joined:
    Feb 27, 2010
    Messages:
    3
    Likes Received:
    0
    Hi
    i 'm setting up a venus 2908 fxs/fxo on 3cx and the auto answer just plays a dial tone after 2 rings and i have to enter the extension manually is there any way i can set it up to automaticaly go to extention #800 /receptionist ? please let me have the answer asap
     
  2. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,375
    Likes Received:
    231
    It sounds like the device you are using, I'm not familiar with it, is set for "two stage dialing", needs to be changed to one stage dialing. Incoming calls on an FXO has to to "speed dial" the 1000X trunk number in 3CX
     
  3. kouroshmostofi

    Joined:
    Feb 27, 2010
    Messages:
    3
    Likes Received:
    0
    actually it answers the incoming calls with the dial tone not the outgoing so please let me know if there is any thing i can do about it ...
     
  4. kouroshmostofi

    Joined:
    Feb 27, 2010
    Messages:
    3
    Likes Received:
    0
    well it seems all i had to do was to set 800 (my digital receptionist extension) as my hot line number and set 0 as my hotline time out so if any one else had this trouble tis is all you have to do
     
Thread Status:
Not open for further replies.