Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

Grandstream 4104

Discussion in '3CX Phone System - General' started by zadean, May 23, 2008.

Thread Status:
Not open for further replies.
  1. zadean

    Joined:
    May 30, 2007
    Messages:
    14
    Likes Received:
    0
    I am using a Grandstream 4014 gateway for POTS lines into the 3CX.
    They have all registered no problem using identification and virtual extensions 10000, 10001, 10002 and 10003.
    I have plugged 2 POTS lines into the gateway and the status reflects FXO lines connected on Line 1 and Line 2.
    It works fine, the only problem is that when calls come in from both lines, they show as all coming in on 10000. Some should show coming in on 10000 and some on 10001, depending on the number dialed.
    How do I correct this to show which incoming line is ringing? As I would like to use the digital receptionist to route calls from one line in one way and from the other line in another way.
    Thanks
     
  2. cyberspot

    Joined:
    May 12, 2008
    Messages:
    87
    Likes Received:
    0
    Hi

    My opinion would be to change the settings to the default in grandstream and
    delete the lines from 3cx then follow the instructions from the link below and it should play like you want.

    http: //www.3cx.com/voip-gateways/Grandstream-GXW-41044108 NO LONGER AVAILABLE. NEW LINK http://www.3cx.com/voip-gateways/

    thanks
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
Thread Status:
Not open for further replies.