Grandstream 4108 multi PSTN lines

Discussion in '3CX Phone System - General' started by Keithsteph803, Dec 8, 2008.

Thread Status:
Not open for further replies.
  1. Keithsteph803

    Joined:
    Dec 8, 2008
    Messages:
    2
    Likes Received:
    0
    I have a 3cx server connected to a Grandstream 4108 with 5 PSTN lines. I can make out-going calls on the line I setup in the rule but any incomeing call defaults to the first number which I have set in a ring group. How can I get calls to come in on the line that the phone number is set to and not roll to the first grandstream port?


    Thanks
    Keith
     
  2. jbartelt

    Joined:
    Jun 26, 2008
    Messages:
    1
    Likes Received:
    0
    If someone dials one of your lines directly, do you want it to go into the Ring Group or ring a particular extension?

    i.e. you have 5 POTS lines ...
    Dial in on line #1 go to Ring Group #1
    Dial in on line #2 go to Ring Group #1
    Dial in on line #3 go to ext 250
    Dial in on line #4 go to ext 251
    Dial in on line #5 go to Ring Group #2

    something like that?

    JB
     
  3. Keithsteph803

    Joined:
    Dec 8, 2008
    Messages:
    2
    Likes Received:
    0
Thread Status:
Not open for further replies.