Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

GXW-4004 not able to make outbound calls

Discussion in '3CX Phone System - General' started by KTech99, Jul 29, 2015.

Thread Status:
Not open for further replies.
  1. KTech99

    Joined:
    Jul 29, 2015
    Messages:
    4
    Likes Received:
    0
    Replaced a bad GXW-4004 with a new one. Setup new one just like old. Able to receive calls but not make calls.
     
  2. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    11,129
    Likes Received:
    330
    What do the 3CX logs show when a call is presented to the gateway? Just a time-out, or some other message?

    Loading the same config file into an identical box should be pretty straight forward, one would think. I'm wondering if there are some options that the config file doesn't "deal" with.
     
  3. KTech99

    Joined:
    Jul 29, 2015
    Messages:
    4
    Likes Received:
    0
    this is what I get when I try to make a call, at the bottom of the file is where i reset the 4004

    04-Aug-2015 13:58:29.868 Leg L:1834.1[Unknown:] is terminated: Cause: BYE from PBX
    04-Aug-2015 13:58:29.862 [CM502001]: Source info: From: "130"<sip:130@10.10.10.140.5060;user=phone>;tag=1762410600; To: <sip:101@10.10.10.140.5060;user=phone>
    04-Aug-2015 13:58:29.862 [CM503013]: Call(C:1834): Incoming call rejected, caller is unknown; msg=Ivite-IN Recv Req INVITE from 10.10.10.106:5062 tid=1403375659 Call-ID=1777577812-5062-6@BA.BA.BA.BAG:
    INVITE sip:101@10.10.10.140.5060;user=phone SIP/2.0
    Via: SIP/2.0/UDP 10.10.10.106:5062;branch=z9hG4bK1403375659;rport=5062
    Max-Forwards: 70
    Route: <sip:10.10.10.140:5060;lr>
    Contact: "130"<sip:130@10.10.10.106:5062;user=phone>
    To: <sip:101@10.10.10.140.5060;user=phone>
    From: "130"<sip:130@10.10.10.140.5060;user=phone>;tag=1762410600
    Call-ID: 1777577812-5062-6@BA.BA.BA.BAG
    CSeq: 11 INVITE
    Accept: application/sdp, application/dtmf-relay
    Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, INFO, REFER, UPDATE
    Content-Type: application/sdp
    Proxy-Authorization: Digest username="130",realm="3CXPhoneSystem",nonce="414d535c0bd19c5535:14a58eb7fa66fbbef8eb4832e6adc2ce",uri="sip:101@10.10.10.140.5060;user=phone",response="a575d66532d3cac6414ff5a1401a76e1",algorithm=MD5
    Supported: replaces, path, timer, eventlist
    User-Agent: Grandstream GXW-4004 V1.5A 1.0.12.4 chip V2.2
    Privacy: none
    P-Preferred-Identity: "130" <sip:130@10.10.10.140.5060;user=phone>
    Content-Length: 451

    v=0
    o=130 8002 8000 IN IP4 10.10.10.106
    s=SIP Call
    c=IN IP4 10.10.10.106
    t=0 0
    m=audio 5008 RTP/AVP 0 8 4 18 2 97 102 100 101
    a=sendrecv
    a=rtpmap:0 PCMU/8000
    a=ptime:20
    a=rtpmap:8 PCMA/8000
    a=rtpmap:4 G723/8000
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=no
    a=rtpmap:2 G726-32/8000
    a=rtpmap:97 iLBC/8000
    a=fmtp:97 mode=20
    a=rtpmap:102 G729E/8000
    a=rtpmap:100 AAL2-G726-16/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16,32-36,54
    04-Aug-2015 13:57:29.589 [CM504001]: Endpoint Extn:122: new contact is registered. Contact(s): [sip:122@10.10.10.106:5066 / 122]
    04-Aug-2015 13:57:29.405 Got REGISTER for foreign registrar: registrar host <sip:mad:10.10.10.140.5060:5060> is not mine!
    04-Aug-2015 13:57:28.288 [CM504001]: Endpoint Extn:121: new contact is registered. Contact(s): [sip:121@10.10.10.106:5064 / 121]
    04-Aug-2015 13:57:27.926 Got REGISTER for foreign registrar: registrar host <sip:mad:10.10.10.140.5060:5060> is not mine!
    04-Aug-2015 13:57:26.822 [CM504008]: Fax Service: Fax.130 registered as sip:130@10.10.10.140.5060 with contact sip:130@10.10.10.106:5062;user=phone
    04-Aug-2015 13:57:26.576 Got REGISTER for foreign registrar: registrar host <sip:mad:10.10.10.140.5060:5060> is not mine!
    04-Aug-2015 13:57:25.451 [CM504001]: Endpoint Extn:106: new contact is registered. Contact(s): [sip:106@10.10.10.106:5060 / 106]
    04-Aug-2015 13:57:25.086 Got REGISTER for foreign registrar: registrar host <sip:mad:10.10.10.140.5060:5060> is not mine!
     
  4. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    11,129
    Likes Received:
    330
    This is why it doesn't like the call.

    Was there a previous, successful, registration for this extension?
     
  5. KTech99

    Joined:
    Jul 29, 2015
    Messages:
    4
    Likes Received:
    0
    It shows all the extensions registered in the extension list
     
  6. complex1

    complex1 Active Member

    Joined:
    Jan 25, 2010
    Messages:
    815
    Likes Received:
    49
    Hi,

    This is the cause of the issue.
    I had this before with an external device, but can’t remember how I solved it.
    Some settings in the GXW are wrong. (Not corresponding or equal with the settings in 3CX)
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  7. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    11,129
    Likes Received:
    330
    I missed that.

    Looks like the IP, somewhere in the GXW was put in incorrectly. 10.10.10.140.5060 At some point you put in the IP that had the port number "tacked on" to it. See the DOT before the port number.
     
  8. KTech99

    Joined:
    Jul 29, 2015
    Messages:
    4
    Likes Received:
    0
    Thanks for the help, I did fat finger the IP address in the gateway. All working now.
     
Thread Status:
Not open for further replies.