• V20: 3CX Re-engineered. Get V20 for increased security, better call management, a new admin console and Windows softphone. Learn More.

Help with Eurotech Communication Gateway

Status
Not open for further replies.

edleeeng

Joined
Jun 7, 2011
Messages
3
Reaction score
0
Hi, I am trying to connect my Eurotech VoIP2all 2 channels equipment with a 3CX VoIP Phone, however the gateway register the 3CX SIP but it does not connect.

This is the 3CX debug Screen:


Integration with 3CX Call Assistant is OFF
Translation file OK
Attempting to connect 10.16.2.245
Phone got as local port 60033
Plantronics not connected
Jabra not connected
Yealink not connected
RTP engine OK
SIP engine OK
Sound mic device OK []
Sound ring device OK []
Sound speaker device OK []
Phone is no longer connected

The debug mode for the Eurotech gateway shows:

[6/7/2011 11:33:03 AM]-> [Full] --> Got a message from 0 type 0x48 (len 5)

[6/7/2011 11:33:03 AM]-> [Full] --> GSM : [module0] Got msg :
[6/7/2011 11:33:03 AM]-> [Full] --> 0x3
[6/7/2011 11:33:03 AM]-> [Full] --> 0x0
[6/7/2011 11:33:03 AM]-> [Full] --> 0x48
[6/7/2011 11:33:03 AM]-> [Full] --> 0xbf
[6/7/2011 11:33:03 AM]-> [Full] --> 0x1
[6/7/2011 11:33:03 AM]-> [Info] --> GSM : [module0] module 0 is activated, idle (0x80), buf[2] = 0X48, buf[3] = 0XBF
[6/7/2011 11:33:03 AM]-> [Detail] --> SC : Got port active for port 0 start_time = 1307446353
[6/7/2011 11:33:03 AM]-> [Full] --> GSM : [module0] module 0 is registered to network, idle
[6/7/2011 11:33:03 AM]-> [Detail] --> port 0 registered
[6/7/2011 11:33:03 AM]-> [Full] --> GSM : module 0 own sim present (0x1)
[6/7/2011 11:33:03 AM]-> [Full] --> SC : Port 0, Sim 0 status 1
[6/7/2011 11:33:03 AM]-> [Full] --> GSM : moduel 0, status bf
[6/7/2011 11:33:03 AM]-> [Full] --> Got a message from 0 type 0x4a (len 20)

[6/7/2011 11:33:03 AM]-> [Full] --> GSM : [module0] Got msg :
[6/7/2011 11:33:03 AM]-> [Full] --> 0x12
[6/7/2011 11:33:03 AM]-> [Full] --> 0x0
[6/7/2011 11:33:03 AM]-> [Full] --> 0x4a
[6/7/2011 11:33:03 AM]-> [Full] --> 0x5
[6/7/2011 11:33:03 AM]-> [Full] --> 0x0
[6/7/2011 11:33:03 AM]-> [Full] --> 0x0
[6/7/2011 11:33:03 AM]-> [Full] --> 0x2b
[6/7/2011 11:33:03 AM]-> [Full] --> 0x35
[6/7/2011 11:33:03 AM]-> [Full] --> 0x32
[6/7/2011 11:33:03 AM]-> [Full] --> 0x39
[6/7/2011 11:33:03 AM]-> [Full] --> 0x34
[6/7/2011 11:33:03 AM]-> [Full] --> 0x31
[6/7/2011 11:33:03 AM]-> [Full] --> 0x30
[6/7/2011 11:33:03 AM]-> [Full] --> 0x30
[6/7/2011 11:33:03 AM]-> [Full] --> 0x30
[6/7/2011 11:33:03 AM]-> [Full] --> 0x30
[6/7/2011 11:33:03 AM]-> [Full] --> 0x31
[6/7/2011 11:33:03 AM]-> [Full] --> 0x34
[6/7/2011 11:33:03 AM]-> [Full] --> 0x31
[6/7/2011 11:33:03 AM]-> [Full] --> 0x30
[6/7/2011 11:33:03 AM]-> [Full] --> GSM : module 0, got SMSC [+5294100001410]
[6/7/2011 11:33:03 AM]-> [Full] --> SC : current time is mon 5, day 2, week day 7
[6/7/2011 11:33:04 AM]-> [Full] --> SC : current time is mon 5, day 2, week day 7
[6/7/2011 11:33:04 AM]-> [Full] --> Got a message from 1 type 0x48 (len 5)

[6/7/2011 11:33:04 AM]-> [Full] --> GSM : [module1] Got msg :
[6/7/2011 11:33:04 AM]-> [Full] --> 0x3
[6/7/2011 11:33:04 AM]-> [Full] --> 0x0
[6/7/2011 11:33:04 AM]-> [Full] --> 0x48
[6/7/2011 11:33:04 AM]-> [Full] --> 0x48
[6/7/2011 11:33:04 AM]-> [Full] --> 0x0
[6/7/2011 11:33:04 AM]-> [Info] --> GSM : [module1] module 1 is not activated, idle (0), buf[2] = 0X48, buf[3] = 0X48
[6/7/2011 11:33:04 AM]-> [Full] --> CM : Port 1 disabled
[6/7/2011 11:33:04 AM]-> [Detail] --> GSM : module 1 lost communication
[6/7/2011 11:33:04 AM]-> [Full] --> GSM : [module1] module 1 is not registered to network, idle
[6/7/2011 11:33:04 AM]-> [Full] --> GSM : module 1 own sim not present
[6/7/2011 11:33:04 AM]-> [Full] --> SC : Port 1, Sim 0 status 0
[6/7/2011 11:33:04 AM]-> [Full] --> SC : Port 1, Sim 1 status 0
[6/7/2011 11:33:04 AM]-> [Full] --> SC : Port 1, Sim 2 status 0
[6/7/2011 11:33:04 AM]-> [Full] --> SC : Port 1, Sim 3 status 0
[6/7/2011 11:33:04 AM]-> [Full] --> GSM : module 1 request SPA
[6/7/2011 11:33:04 AM]-> [Full] --> GSM : moduel 1, status 48
[6/7/2011 11:33:04 AM]-> [Full] --> SC : start thread for port 1
[6/7/2011 11:33:04 AM]-> [Detail] --> AND : port = 1, cur_sim_ind = -1
[6/7/2011 11:33:04 AM]-> [Detail] --> Wrong sim index (1 -1) (disconnect)
[6/7/2011 11:33:04 AM]-> [Detail] --> AND : cd_sims_qty 0, load type 0
[6/7/2011 11:33:04 AM]-> [Detail] --> SC : didn't find a sim to connect (port 1) (1)
[6/7/2011 11:33:04 AM]-> [Detail] --> No sim connected, connecting own sim (port 1)
[6/7/2011 11:33:04 AM]-> [Detail] --> SC : Connecting local sim (0) to port 1 (status 0)
[6/7/2011 11:33:04 AM]-> [Full] --> SC : Don't send spa waiting for sim to be inserted (port 1)
[6/7/2011 11:33:04 AM]-> [Full] --> SC : end of handle_time_port, port 1
[6/7/2011 11:33:04 AM]-> [Full] --> Got a message from 1 type 0x4a (len 6)

[6/7/2011 11:33:04 AM]-> [Full] --> GSM : [module1] Got msg :
[6/7/2011 11:33:04 AM]-> [Full] --> 0x4
[6/7/2011 11:33:04 AM]-> [Full] --> 0x0
[6/7/2011 11:33:04 AM]-> [Full] --> 0x4a
[6/7/2011 11:33:04 AM]-> [Full] --> 0x5
[6/7/2011 11:33:04 AM]-> [Full] --> 0x0
[6/7/2011 11:33:04 AM]-> [Full] --> 0x0
[6/7/2011 11:33:04 AM]-> [Full] --> GSM : module 1, got SMSC []
[6/7/2011 11:33:05 AM]-> [Full] --> SC : current time is mon 5, day 2, week day 7
R_XML,CF_User
[6/7/2011 11:33:05 AM]-> [Detail] --> Got cmd (14) [R_XML,CF_User
]

[6/7/2011 11:33:05 AM]-> [Full] --> CFG : Start of read_node

[6/7/2011 11:33:05 AM]-> [Full] --> CFG : End of read_node

A_XML,<CF_User>34000</CF_User>
[6/7/2011 11:33:06 AM]-> [Info] --> (558) [REGISTER sip:10.16.2.245:5060 SIP/2.0

Via: SIP/2.0/UDP 10.16.2.200:53866;branch=z9hG4bK-d8754z-e366ee71717b8908-1---d8754z-;rport

Max-Forwards: 70

Contact: <sip:[email protected]:53866;rinstance=7e4cc208e54f933d>

To: "Ed"<sip:[email protected]:5060>

From: "Ed"<sip:[email protected]:5060>;tag=c0043a2f

Call-ID: YTE2OWYyNDNkOWNiYjhjOTkwYjZmNGUxZTg0MTVmNDY.

CSeq: 1 REGISTER

Expires: 120

Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REGISTER, SUBSCRIBE, NOTIFY, REFER, INFO, MESSAGE

Supported: replaces

User-Agent: 3CXPhone 5.0.14900.0

Content-Length: 0



]

[6/7/2011 11:33:06 AM]-> [Detail] --> SIP Server : Got a sip message from 10.16.2.200 (53866)

[6/7/2011 11:33:06 AM]-> [Detail] --> Got REGISTER msg
[6/7/2011 11:33:06 AM]-> [Info] --> AND : register_info->session.via_count = 1
[6/7/2011 11:33:06 AM]-> [Detail] --> Before contact in Register

[6/7/2011 11:33:06 AM]-> [Detail] --> SM : Before check expires [;rinstance=7e4cc208e54f933d>]

[6/7/2011 11:33:06 AM]-> [Detail] --> SM : end of contact 22

[6/7/2011 11:33:06 AM]-> [Detail] --> After contact
[6/7/2011 11:33:06 AM]-> [Detail] --> SP : contact field is [[email protected]:53866]

[6/7/2011 11:33:06 AM]-> [Detail] --> user name : [email protected] [[email protected]:53866]

[6/7/2011 11:33:06 AM]-> [Detail] --> SU : Adding voip user to server


[6/7/2011 11:33:06 AM]-> [Detail] --> User ip info : 10.16.2.200 (53866)


[6/7/2011 11:33:06 AM]-> [Detail] --> User sip info : [email protected] (Reg 120)


[6/7/2011 11:33:06 AM]-> [Info] --> SU : New user at 0, [email protected], 10.16.2.200


[6/7/2011 11:33:06 AM]-> [Detail] --> SU : At the end of adding user

[6/7/2011 11:33:06 AM]-> [Detail] --> SIP : Create OK []
[6/7/2011 11:33:06 AM]-> [Info] --> Sending msg to 10.16.2.200, port 53866
[6/7/2011 11:33:06 AM]-> [Info] --> (416) [SIP/2.0 200 OK

Via: SIP/2.0/UDP 10.16.2.200:53866;branch=z9hG4bK-d8754z-e366ee71717b8908-1---d8754z-;rport;received=10.16.2.200

To: "Ed"<sip:[email protected]:5060>;tag=12ab34cd

From: "Ed"<sip:[email protected]:5060>;tag=c0043a2f

CSeq: 1 REGISTER

Call-ID: YTE2OWYyNDNkOWNiYjhjOTkwYjZmNGUxZTg0MTVmNDY.

Allow: INVITE, BYE, CANCEL, ACK, INFO, REGISTER

Supported:

Allow-Events: telephone-event

Content-Length: 0



]
[6/7/2011 11:33:06 AM]-> [Detail] --> SIP : Got orig [10.16.2.200], [10.16.2.200] [a]
[6/7/2011 11:33:06 AM]-> [Detail] --> SIP : sendig to 3355578378 27346
[6/7/2011 11:33:06 AM]-> [Detail] --> SIP : Waiting for msg from sip user

[6/7/2011 11:33:06 AM]-> [Full] --> SC : current time is mon 5, day 2, week day 7
[6/7/2011 11:33:07 AM]-> [Full] --> SC : current time is mon 5, day 2, week day 7
[6/7/2011 11:33:08 AM]-> [Full] --> SC : current time is mon 5, day 2, week day 7
[6/7/2011 11:33:09 AM]-> [Full] --> SC : current time is mon 5, day 2, week day 7
[6/7/2011 11:33:09 AM]-> [Detail] --> Statfs : number of blocks 768
[6/7/2011 11:33:09 AM]-> [Detail] --> Statfs : number of free blocks 443
[6/7/2011 11:33:09 AM]-> [Detail] --> Statfs : number of avail blocks 443
[6/7/2011 11:33:09 AM]-> [Detail] --> AND : memory:
[MemTotal: 29700 kB
MemFree: 11764 kB

ANY HELP WILL BE APPRECIATED.

Regards,

Ed Lee-Eng
 
Could you change the device local port from 60033 to 5060 and see if that helps?
 
Hi
The logfile you provided is, let's say, very specific to the gateway - this is normal but, because of this, is not very helpful for me. If you are familiar with the Wireshark, please make a capture on the machine running the 3CXPhone - since it's standard SIP, will be clear for everybody.

You may try also what David suggested, to configure 3CXPhone to use a specific port, say 5070.

Regards
vali
 
Dave Benwell and Vali_3CX

Sorry for my delay to get back to you, I did use X-Lite version 3.0 build 29712 for a quick solution while I was traveling. I am back and decided to find the right solution to make Eurotech and 3CX work together. Your help will be very well appreciated.

In Dave suggestion to change the device local port from 60033 to 5060; the answer is this local port is assigned by 3CX when you set It up as you will see in their Debug screen, and the port changes every time you do it. To maintain the structure of my original posting I am listing 3CX, and Eurotech information adding the WireShark file for your review.

The 3CX softphone got registered with Eurotech but while the status is available it shows not connected, it does not process calls.

These are the actual parameters:

3CX Debug Screen

<13:05:18> Integration with 3CX Call Assistant is OFF
<13:05:18> Translation file OK
<13:05:19> Attempting to connect 10.16.2.245
<13:05:19> Phone got as local port 63799
<13:05:19> Plantronics not connected
<13:05:19> Jabra not connected
<13:05:19> Yealink not connected
<13:05:19> RTP engine OK
<13:05:20> SIP engine OK
<13:05:20> Sound mic device OK []
<13:05:20> Sound ring device OK []
<13:05:20> Sound speaker device OK []
<13:05:20> Phone is no longer connected


<13:06:15> Integration with 3CX Call Assistant is OFF
<13:06:15> Translation file OK
<13:06:15> Attempting to connect 10.16.2.245
<13:06:15> Phone got as local port 62802
<13:06:16> Plantronics not connected
<13:06:16> Jabra not connected
<13:06:16> Yealink not connected
<13:06:17> RTP engine OK
<13:06:17> SIP engine OK
<13:06:18> Sound mic device OK []
<13:06:18> Sound ring device OK []
<13:06:18> Sound speaker device OK []
<13:06:20> Phone is no longer connected

Eurotech Debug Screen:

[7/24/2011 1:04:18 PM]-> [Full] --> CFG : Start of read_node

[7/24/2011 1:04:18 PM]-> [Full] --> CFG : End of read_node

A_XML,<CF_User>34000</CF_User>
[7/24/2011 1:04:19 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:19 PM]-> [Full] --> SC : current time is 13:4 (W0, M24)
[7/24/2011 1:04:19 PM]-> [Full] --> SC : start thread for port 0
[7/24/2011 1:04:19 PM]-> [Detail] --> AND : port = 0, cur_sim_ind = 0
[7/24/2011 1:04:19 PM]-> [Detail] --> sim default 1 port 0 with local sim
[7/24/2011 1:04:19 PM]-> [Detail] --> AND : cd_sims_qty 0, load type 0
[7/24/2011 1:04:19 PM]-> [Detail] --> SC : didn't find a sim to connect (port 0) (1)
[7/24/2011 1:04:19 PM]-> [Detail] --> Local sim connected, connecting own sim
[7/24/2011 1:04:19 PM]-> [Detail] --> SC : Connecting local sim (0) to port 0 (status 1)
[7/24/2011 1:04:19 PM]-> [Detail] --> AND : sim_ind = 0 for port 0
[7/24/2011 1:04:19 PM]-> [Detail] --> AND : port = 0, sim = 0
[7/24/2011 1:04:19 PM]-> [Detail] --> SC : min_c 0 max_c 0 th -1 (local)
[7/24/2011 1:04:19 PM]-> [Detail] --> SC : Sending sim defs p0, [ ] [0]
[7/24/2011 1:04:19 PM]-> [Full] --> GSM : got bcch def 0
[7/24/2011 1:04:19 PM]-> [Detail] --> AND : msg_buf = [,0,0, ,0,0,1111,0,]
[7/24/2011 1:04:19 PM]-> [Full] --> GSM : Send command to module 0, len 22
[7/24/2011 1:04:19 PM]-> [Full] --> 0x41
[7/24/2011 1:04:19 PM]-> [Full] --> 0x13
[7/24/2011 1:04:19 PM]-> [Full] --> 0x0
[7/24/2011 1:04:19 PM]-> [Full] --> 0x27
[7/24/2011 1:04:19 PM]-> [Full] --> 0x2c
[7/24/2011 1:04:19 PM]-> [Full] --> 0x30
[7/24/2011 1:04:19 PM]-> [Full] --> 0x2c
[7/24/2011 1:04:19 PM]-> [Full] --> 0x30
[7/24/2011 1:04:19 PM]-> [Full] --> 0x2c
[7/24/2011 1:04:19 PM]-> [Full] --> 0x20
[7/24/2011 1:04:19 PM]-> [Full] --> 0x2c
[7/24/2011 1:04:19 PM]-> [Full] --> 0x30
[7/24/2011 1:04:19 PM]-> [Full] --> 0x2c
[7/24/2011 1:04:19 PM]-> [Full] --> 0x30
[7/24/2011 1:04:19 PM]-> [Full] --> 0x2c
[7/24/2011 1:04:19 PM]-> [Full] --> 0x31
[7/24/2011 1:04:19 PM]-> [Full] --> 0x31
[7/24/2011 1:04:19 PM]-> [Full] --> 0x31
[7/24/2011 1:04:19 PM]-> [Full] --> 0x31
[7/24/2011 1:04:19 PM]-> [Full] --> 0x2c
[7/24/2011 1:04:19 PM]-> [Full] --> 0x30
[7/24/2011 1:04:19 PM]-> [Full] --> 0x2c
[7/24/2011 1:04:19 PM]-> [Info] --> gsm connect module 0
[7/24/2011 1:04:19 PM]-> [Full] --> GSM : Send command to module 0, len 7
[7/24/2011 1:04:19 PM]-> [Full] --> 0x41
[7/24/2011 1:04:19 PM]-> [Full] --> 0x4
[7/24/2011 1:04:19 PM]-> [Full] --> 0x0
[7/24/2011 1:04:19 PM]-> [Full] --> 0x26
[7/24/2011 1:04:19 PM]-> [Full] --> 0x1
[7/24/2011 1:04:19 PM]-> [Full] --> I2C : sending cmd to gsm slave 0x10, len=22
[7/24/2011 1:04:19 PM]-> [Full] --> 0x41
[7/24/2011 1:04:19 PM]-> [Full] --> 0x13
[7/24/2011 1:04:19 PM]-> [Full] --> 0x0
[7/24/2011 1:04:19 PM]-> [Full] --> 0x27
[7/24/2011 1:04:19 PM]-> [Full] --> 0x2c
[7/24/2011 1:04:19 PM]-> [Full] --> SC : start thread for port 1
[7/24/2011 1:04:19 PM]-> [Full] --> SC : start thread for port 2
[7/24/2011 1:04:19 PM]-> [Full] --> SC : start thread for port 3
[7/24/2011 1:04:19 PM]-> [Full] --> SC : start thread for port 4
[7/24/2011 1:04:19 PM]-> [Full] --> SC : start thread for port 5
[7/24/2011 1:04:19 PM]-> [Full] --> SC : start thread for port 6
[7/24/2011 1:04:19 PM]-> [Full] --> SC : start thread for port 7
[7/24/2011 1:04:19 PM]-> [Full] --> SC : start thread for port 8
[7/24/2011 1:04:19 PM]-> [Full] --> SC : start thread for port 9
[7/24/2011 1:04:19 PM]-> [Full] --> SC : start thread for port 10
[7/24/2011 1:04:19 PM]-> [Full] --> SC : start thread for port 11
[7/24/2011 1:04:19 PM]-> [Full] --> SC : start thread for port 12
[7/24/2011 1:04:19 PM]-> [Full] --> SC : start thread for port 13
[7/24/2011 1:04:19 PM]-> [Full] --> SC : start thread for port 14
[7/24/2011 1:04:19 PM]-> [Full] --> SC : start thread for port 15
[7/24/2011 1:04:20 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:21 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:22 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:23 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:24 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:25 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:26 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:27 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:27 PM]-> [Full] --> Got a message from 0 type 0x48 (len 5)

[7/24/2011 1:04:27 PM]-> [Full] --> GSM : [module0] Got msg :
[7/24/2011 1:04:27 PM]-> [Full] --> 0x3
[7/24/2011 1:04:27 PM]-> [Full] --> 0x0
[7/24/2011 1:04:27 PM]-> [Full] --> 0x48
[7/24/2011 1:04:27 PM]-> [Full] --> 0xbf
[7/24/2011 1:04:27 PM]-> [Full] --> 0x1
[7/24/2011 1:04:27 PM]-> [Info] --> GSM : [module0] module 0 is activated, idle (0x80), buf[2] = 0X48, buf[3] = 0XBF
[7/24/2011 1:04:27 PM]-> [Detail] --> SC : Got port active for port 0 start_time = 1311512637
[7/24/2011 1:04:27 PM]-> [Full] --> GSM : [module0] module 0 is registered to network, idle
[7/24/2011 1:04:27 PM]-> [Detail] --> port 0 registered
[7/24/2011 1:04:27 PM]-> [Full] --> GSM : module 0 own sim present (0x1)
[7/24/2011 1:04:27 PM]-> [Full] --> SC : Port 0, Sim 0 status 1
[7/24/2011 1:04:27 PM]-> [Full] --> GSM : moduel 0, status bf
[7/24/2011 1:04:27 PM]-> [Full] --> Got a message from 0 type 0x4a (len 17)

[7/24/2011 1:04:27 PM]-> [Full] --> GSM : [module0] Got msg :
[7/24/2011 1:04:27 PM]-> [Full] --> 0xf
[7/24/2011 1:04:27 PM]-> [Full] --> 0x0
[7/24/2011 1:04:27 PM]-> [Full] --> 0x4a
[7/24/2011 1:04:27 PM]-> [Full] --> 0x5
[7/24/2011 1:04:27 PM]-> [Full] --> 0x0
[7/24/2011 1:04:27 PM]-> [Full] --> 0x0
[7/24/2011 1:04:27 PM]-> [Full] --> 0x31
[7/24/2011 1:04:27 PM]-> [Full] --> 0x32
[7/24/2011 1:04:27 PM]-> [Full] --> 0x30
[7/24/2011 1:04:27 PM]-> [Full] --> 0x36
[7/24/2011 1:04:27 PM]-> [Full] --> 0x33
[7/24/2011 1:04:27 PM]-> [Full] --> 0x31
[7/24/2011 1:04:27 PM]-> [Full] --> 0x33
[7/24/2011 1:04:27 PM]-> [Full] --> 0x30
[7/24/2011 1:04:27 PM]-> [Full] --> 0x30
[7/24/2011 1:04:27 PM]-> [Full] --> 0x30
[7/24/2011 1:04:27 PM]-> [Full] --> 0x34
[7/24/2011 1:04:27 PM]-> [Full] --> GSM : module 0, got SMSC [12063130004]
[7/24/2011 1:04:28 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
R_XML,CF_User
[7/24/2011 1:04:28 PM]-> [Detail] --> Got cmd (14) [R_XML,CF_User
]

[7/24/2011 1:04:28 PM]-> [Full] --> CFG : Start of read_node

[7/24/2011 1:04:28 PM]-> [Full] --> CFG : End of read_node

A_XML,<CF_User>34000</CF_User>
[7/24/2011 1:04:29 PM]-> [Full] --> Got a message from 1 type 0x48 (len 5)

[7/24/2011 1:04:29 PM]-> [Full] --> GSM : [module1] Got msg :
[7/24/2011 1:04:29 PM]-> [Full] --> 0x3
[7/24/2011 1:04:29 PM]-> [Full] --> 0x0
[7/24/2011 1:04:29 PM]-> [Full] --> 0x48
[7/24/2011 1:04:29 PM]-> [Full] --> 0x48
[7/24/2011 1:04:29 PM]-> [Full] --> 0x0
[7/24/2011 1:04:29 PM]-> [Info] --> GSM : [module1] module 1 is not activated, idle (0), buf[2] = 0X48, buf[3] = 0X48
[7/24/2011 1:04:29 PM]-> [Full] --> CM : Port 1 disabled
[7/24/2011 1:04:29 PM]-> [Detail] --> GSM : module 1 lost communication
[7/24/2011 1:04:29 PM]-> [Full] --> GSM : [module1] module 1 is not registered to network, idle
[7/24/2011 1:04:29 PM]-> [Full] --> GSM : module 1 own sim not present
[7/24/2011 1:04:29 PM]-> [Full] --> SC : Port 1, Sim 0 status 0
[7/24/2011 1:04:29 PM]-> [Full] --> SC : Port 1, Sim 1 status 0
[7/24/2011 1:04:29 PM]-> [Full] --> SC : Port 1, Sim 2 status 0
[7/24/2011 1:04:29 PM]-> [Full] --> SC : Port 1, Sim 3 status 0
[7/24/2011 1:04:29 PM]-> [Full] --> GSM : module 1 request SPA
[7/24/2011 1:04:29 PM]-> [Full] --> GSM : moduel 1, status 48
[7/24/2011 1:04:29 PM]-> [Full] --> SC : start thread for port 1
[7/24/2011 1:04:29 PM]-> [Detail] --> AND : port = 1, cur_sim_ind = -1
[7/24/2011 1:04:29 PM]-> [Detail] --> Wrong sim index (1 -1) (disconnect)
[7/24/2011 1:04:29 PM]-> [Detail] --> AND : cd_sims_qty 0, load type 0
[7/24/2011 1:04:29 PM]-> [Detail] --> SC : didn't find a sim to connect (port 1) (1)
[7/24/2011 1:04:29 PM]-> [Detail] --> No sim connected, connecting own sim (port 1)
[7/24/2011 1:04:29 PM]-> [Detail] --> SC : Connecting local sim (0) to port 1 (status 0)
[7/24/2011 1:04:29 PM]-> [Full] --> SC : Don't send spa waiting for sim to be inserted (port 1)
[7/24/2011 1:04:29 PM]-> [Full] --> SC : end of handle_time_port, port 1
[7/24/2011 1:04:29 PM]-> [Full] --> Got a message from 1 type 0x4a (len 6)

[7/24/2011 1:04:29 PM]-> [Full] --> GSM : [module1] Got msg :
[7/24/2011 1:04:29 PM]-> [Full] --> 0x4
[7/24/2011 1:04:29 PM]-> [Full] --> 0x0
[7/24/2011 1:04:29 PM]-> [Full] --> 0x4a
[7/24/2011 1:04:29 PM]-> [Full] --> 0x5
[7/24/2011 1:04:29 PM]-> [Full] --> 0x0
[7/24/2011 1:04:29 PM]-> [Full] --> 0x0
[7/24/2011 1:04:29 PM]-> [Full] --> GSM : module 1, got SMSC []
[7/24/2011 1:04:29 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:29 PM]-> [Detail] --> Statfs : number of blocks 768
[7/24/2011 1:04:29 PM]-> [Detail] --> Statfs : number of free blocks 445
[7/24/2011 1:04:29 PM]-> [Detail] --> Statfs : number of avail blocks 445
[7/24/2011 1:04:29 PM]-> [Detail] --> AND : memory:
[MemTotal: 29700 kB
MemFree: 11720 kB
]
[7/24/2011 1:04:29 PM]-> [Info] --> CM : count 0, success 0, secs 0
I_ALR00,0,0,0
[7/24/2011 1:04:30 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:31 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:32 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:33 PM]-> [Info] --> (4) [



]

[7/24/2011 1:04:33 PM]-> [Detail] --> SIP Server : Got a sip message from 10.16.2.200 (55857)

[7/24/2011 1:04:33 PM]-> [Detail] --> SIP : Waiting for msg from sip user

[7/24/2011 1:04:33 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:34 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:35 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:36 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:37 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:38 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
R_XML,CF_User
[7/24/2011 1:04:38 PM]-> [Detail] --> Got cmd (14) [R_XML,CF_User
]

[7/24/2011 1:04:38 PM]-> [Full] --> CFG : Start of read_node

[7/24/2011 1:04:38 PM]-> [Full] --> CFG : End of read_node

A_XML,<CF_User>34000</CF_User>
[7/24/2011 1:04:39 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:40 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:41 PM]-> [Full] --> SC : current time is mon 6, day 0, week day 24
[7/24/2011 1:04:41 PM]-> [Info] --> (561) [REGISTER sip:10.16.2.245:5060 SIP/2.0

Via: SIP/2.0/UDP 10.16.2.200:63799;branch=z9hG4bK-d8754z-fd01994b13214234-1---d8754z-;rport

Max-Forwards: 70

Contact: <sip:[email protected]:63799;rinstance=ef5ac284ea4241ff>

To: "Ed"<sip:[email protected]:5060>

From: "Ed"<sip:[email protected]:5060>;tag=3b643b0d

Call-ID: NjY4NjA3NzMzMGVlNjhlNTAyNTQ1OGE0MDk0NjQzNjU.

CSeq: 1 REGISTER

Expires: 120

Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REGISTER, SUBSCRIBE, NOTIFY, REFER, INFO, MESSAGE

Supported: replaces

User-Agent: 3CXPhone 5.0.14900.0

Content-Length: 0



]

[7/24/2011 1:04:41 PM]-> [Detail] --> SIP Server : Got a sip message from 10.16.2.200 (63799)

[7/24/2011 1:04:41 PM]-> [Detail] --> Got REGISTER msg
[7/24/2011 1:04:41 PM]-> [Info] --> AND : register_info->session.via_count = 1
[7/24/2011 1:04:41 PM]-> [Detail] --> Before contact in Register

[7/24/2011 1:04:41 PM]-> [Detail] --> SM : Before check expires [;rinstance=ef5ac284ea4241ff>]

[7/24/2011 1:04:41 PM]-> [Detail] --> SM : end of contact 23

[7/24/2011 1:04:41 PM]-> [Detail] --> After contact
[7/24/2011 1:04:41 PM]-> [Detail] --> SP : contact field is [[email protected]:63799]

[7/24/2011 1:04:41 PM]-> [Detail] --> user name : [email protected] [[email protected]:63799]

[7/24/2011 1:04:41 PM]-> [Detail] --> SU : Adding voip user to server


[7/24/2011 1:04:41 PM]-> [Detail] --> User ip info : 10.16.2.200 (63799)


[7/24/2011 1:04:41 PM]-> [Detail] --> User sip info : [email protected] (Reg 120)


[7/24/2011 1:04:41 PM]-> [Info] --> SU : New user at 0, [email protected], 10.16.2.200


[7/24/2011 1:04:41 PM]-> [Detail] --> SU : At the end of adding user

[7/24/2011 1:04:41 PM]-> [Detail] --> SIP : Create OK []
[7/24/2011 1:04:41 PM]-> [Info] --> Sending msg to 10.16.2.200, port 63799
[7/24/2011 1:04:41 PM]-> [Info] --> (418) [SIP/2.0 200 OK

Via: SIP/2.0/UDP 10.16.2.200:63799;branch=z9hG4bK-d8754z-fd01994b13214234-1---d8754z-;rport;received=10.16.2.200

To: "Ed"<sip:[email protected]:5060>;tag=12ab34cd

From: "Ed"<sip:[email protected]:5060>;tag=3b643b0d

CSeq: 1 REGISTER

Call-ID: NjY4NjA3NzMzMGVlNjhlNTAyNTQ1OGE0MDk0NjQzNjU.

Allow: INVITE, BYE, CANCEL, ACK, INFO, REGISTER

Supported:

Allow-Events: telephone-event

Content-Length: 0


Thank you in advance,


Ed Lee-Eng
 
I found the right configuration, it is in the way you setup the ports in the Eurotech gateway to receive the calls. When you dial to your SIM in Port X, it transfer the call to the VoIP port prefix 9 remove 1. It will give you dial tone and you need to to enter 9 +extension number. To set the sip follow the instructions in the manual
 
Status
Not open for further replies.
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.