Help with Server Activity LOG (Line Limit Check)

Discussion in '3CX Phone System - General' started by anjodatec, Aug 14, 2015.

Thread Status:
Not open for further replies.
  1. anjodatec

    Joined:
    Aug 14, 2015
    Messages:
    2
    Likes Received:
    0
    Hi,

    can anyone help us on what´s mean the msg below??

    14-ago-2015 15:03:11.401 Line limit check: Current # of calls for line Lc:10012(@GXW-4104[<sip:10012@192.168.1.12:5062>]) is 0; limit is 1

    tks,

    Renato P
     
  2. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,878
    Likes Received:
    307
    When you set-up a trunk group in 3CX you put in how many concurrent calls there can be. If it is a four port gateway, that number would be four, or less, if you wish to "choke" calls on that trunk group. Some users like to leave a certain number of trunks available for incoming calls.

    The log would appear to be a notification that the limit is set to one, but no calls are in use at the moment.
    I'm assuming that the log is immediately prior to the trunk being used.
     
Thread Status:
Not open for further replies.