How do I dial SIP extension out of my domain

Discussion in '3CX Phone System - General' started by blason, Sep 4, 2012.

Thread Status:
Not open for further replies.
  1. blason

    Joined:
    Sep 4, 2012
    Messages:
    2
    Likes Received:
    0
    Hi Folks,

    I am using 3CX Windows Client and have two domains i.e. example.com and test.com each one has two SIP servers [sip.example.com & sip.test.com] and have a proper SRV record set in DNS.

    I also have two users configured in two domains i.e joe@example.com [Extn 2002] and doh@test.com [6006]

    How user joe can dial user doh using 3CX client?
     
  2. lneblett

    lneblett Well-Known Member

    Joined:
    Sep 7, 2010
    Messages:
    2,061
    Likes Received:
    56
    If you mean the 3CX Softphone client, then I do not believe it supports direct SIP dialing. The keyboard only appears to support numeric along with * and # dialing.
     
  3. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,356
    Likes Received:
    224
    If you were using the 3CX phone as an extension of the 3CX PBX, then a trunk group could be created which "pointed" to each of the domains you wished to reach. If the "extension" were alphanumeric (as you seem to indicate), then you would have to create an outbound rule which would convert a short numeric number to the alphanumeric portion, in the same way that non-numeric Skype calls can be placed.
     
Thread Status:
Not open for further replies.