Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

How to accept DID incoming calls

Discussion in '3CX Phone System - General' started by juanmanuel, Jul 3, 2011.

Thread Status:
Not open for further replies.
  1. juanmanuel

    Joined:
    Jul 3, 2011
    Messages:
    3
    Likes Received:
    0
    Hi:

    I am using one Quintum DX2030 as gateway for one E1 Trunk to PSTN.

    The gateway is registered at 3 CX with extension 22908, so any incoming call to Gateway, it sends it to 3CX, but 3CX rejects this call as: 403 Forbideen

    SIP/2.0 403 Forbidden
    Via: SIP/2.0/UDP 10.40.43.242;branch=z9hG4bK-tenor-0a28-2bf2-02d4
    To: <sip:3205@10.40.40.13>;tag=cf4aa026
    From: <sip:3174248199@10.40.40.13>;tag=a282bf2-55
    Call-ID: call-F1EBCCEE-E985-2E10-0014-6E@10.40.43.242
    CSeq: 2 INVITE
    Retry-After: 334
    User-Agent: 3CXPhoneSystem 9.0.15776.0
    Content-Length: 0


    I this case 3205 is the number of one registered an active 3CX extension.

    I need to know how configure DID in order this incoming call can be sent to the right extension.

    I suppose that 3CX is not able to regconize the "From: <sip:3174248199@10.40.40.13>;tag=a282bf2-55"; where 3174248199 is the caller ID of the phone is calling to gateway thru PSTN.

    I will appreciate any help.

    Thanks and Best Regards

    Juan Acevedo
    jacevedo@e-global.com.c0
     
  2. juanmanuel

    Joined:
    Jul 3, 2011
    Messages:
    3
    Likes Received:
    0
    Sorry, I fix my email: jacevedo@e-global.com.co
     
  3. mlp

    mlp

    Joined:
    Jul 4, 2011
    Messages:
    1
    Likes Received:
    0
    care to share your solution?
     
Thread Status:
Not open for further replies.