I really need help with the SPA3102

Discussion in '3CX Phone System - General' started by dete, Sep 17, 2007.

  1. dete

    Joined:
    Sep 12, 2007
    Messages:
    11
    Likes Received:
    0
    My 3cx System
    3CX3.1.2434.0

    My device
    SPA3102 with 5.7 fimeware

    My Log
    09:51:19.500 MediaServerReporting::RTPReceiver [MS105000] Call(64) Ln:10000@Linea 1: No RTP packets were received on 00000078@:remoteAddr=192.168.0.60:16394,extAddr=0.0.0.0:0,localAddr=192.168.0.131:7228
    09:51:19.500 MediaServerReporting::RTPReceiver [MS105000] Call(64) Ext.100: No RTP packets were received on 00000077@:remoteAddr=192.168.0.131:7000,extAddr=0.0.0.0:0,localAddr=192.168.0.131:7226
    09:51:19.500 StratLink::eek:nHangUp [CM104001] Call(64): Ln:10000@Linea 1 hung up call; cause: BYE; from IP:192.168.0.60
    09:51:19.187 CallLegImpl::eek:nConnected [CM103001] Call(64): Created audio channel for Ln:10000@Linea 1 (192.168.0.60:16394) with Media Server (192.168.0.131:7228)
    09:51:19.187 StratInOut::eek:nConnected [CM104005] Call(64): Setup completed for call from Ext.100 to Ln:10000@Linea 1
    09:51:19.187 CallLegImpl::eek:nConnected [CM103001] Call(64): Created audio channel for Ext.100 (192.168.0.131:7000) with Media Server (192.168.0.131:7226)
    09:51:17.187 CallConf::eek:nProvisional [CM103003] Call(64): Ln:10000@Linea 1 is ringing
    09:51:17.093 CallConf::eek:nIncoming [CM103002] Call(64): Incoming call from 100 (Ext.100) to sip:0685349220@Dekora

    My configuration SPA3102
    VoIP-To-PSTN Gateway Enable: yes
    oIP Caller Auth Method: none
    VoIP PIN Max Retry:
    One Stage Dialing: yes
    Line 1 VoIP Caller DP: none
    VoIP Caller Default DP: none
    Line 1 Fallback DP: none

    My conf 3cx gateway

    Gateway Hostname or IP = 192.168.0.60
    Gateway Port (default is 5060) = 5060
    Use registration's 'Contact' field host/port instead host/port specified in configuration = NO
    Require (optionally: authorized) registration for: Nothing (doesn't require registration at all) = Both in-out calls


    Supports Re-Invite = YES
    Supports 'Replaces' header = NO

    'To.user' field = YES
    'Request-Line-URI' field = YES
    'RemotePartyID;party=called' field = YES

    Gateway is external = NO
    PBX delivers audio = NO
    Use IP in 'Contact' to recognize source = NO
    IP Range = EMPY
    Caller-ID is in 'user' part of (one of following): = 'From' field
    'To' field

    Called-Number (for inbound calls) is in: = 'To.user' field

    Client X-lite 3.0

    Location = Spain


    My problem

    I can recibe calls over the linksys line, but I can't make out calls by the linksys line, for the hung up error. please can anybody help me?

    Thank for your help
     
  2. dete

    Joined:
    Sep 12, 2007
    Messages:
    11
    Likes Received:
    0
    Finally Solved

    PSTN Disconnect Detection
    Detect CPC: no
    Detect Polarity Reversal: no
    Detect PSTN Long Silence: no
    Detect VoIP Long Silence: no

    Detect Disconnect Tone: yes
     

Share This Page