Inbound Caller ID Incorrect

Discussion in '3CX Phone System - General' started by hwong, May 31, 2016.

Thread Status:
Not open for further replies.
  1. hwong

    Joined:
    Jul 17, 2015
    Messages:
    24
    Likes Received:
    0
    Hi all - we are running v14 SP3 and Yealink T46G v 28.80.0.95 phones. The receptionist has noticed multiple times of instances where an incoming call will show as if coming from internal ext. (i.e John Smith: Wireless Caller) even when the call came through to our main number. It doesn't always happen, and I can't seem to recreate or think where the mix-up is occurring.
     
  2. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,737
    Likes Received:
    278
    It may depend on how the call routes before being answered (forwarded?), or if the number matches one in the 3CX Phone book, or one (a directory),internal to the set. You may need to see if there is some sort of pattern...the same number is affected? A check of the 3CX log, for one of these calls , shortly after it happens, may provide some insight.
     
  3. NickD_3CX

    NickD_3CX Support Team
    Staff Member 3CX Support

    Joined:
    Jun 2, 2014
    Messages:
    1,327
    Likes Received:
    73
    There is actually a chance the Provider is actually sending it that way for some reason, but as leejor pointed out, you could probably see that from the Logs if you first set them to Verbose.
     
Thread Status:
Not open for further replies.