inst on server 2003 failed

Discussion in '3CX Phone System - General' started by Anonymous, Oct 1, 2006.

  1. Anonymous

    Anonymous Guest

    service 3cx phonesystem terminates with message:
    could not start 3cx phonesystem
    error 1067: process terminated ubexpectedly

    i've tried to install it on a 2003 server because the same service did not start ob xp workstation - so both 2003 and xp do not start

    config can be done but do not register because this service is not running

    only mg in server status:
    19:07:23.015 >>> Log started >>>
    19:07:23.031 SessionMgr::run ** Adding transports **

    Any idea?
     
  2. Anonymous

    Anonymous Guest

    Do you have Live Communications Server installed and running? I do and I have an identical fault.
     
  3. William400

    William400 Well-Known Member

    Joined:
    Aug 21, 2006
    Messages:
    1,005
    Likes Received:
    0
    Hi

    On XP have you tried to add the EXe related to the services to the Firewall expcetions?

    On 2003 try adding the same EXE's to the DEP list.
     
  4. Anonymous

    Anonymous Guest

    On XP have you tried to add the EXe related to the services to the Firewall expcetions?

    i've disabled the firewall but problem still the same
     
  5. Nick Galea

    Nick Galea Site Admin

    Joined:
    Jun 6, 2006
    Messages:
    1,677
    Likes Received:
    18
    Check if another software is using port 5060

    Usually this happens when port 5060 is still in use. I suggest closing down all applications, then restarting the machine. Try to restart the phone system service. If it fails again, check if some software is using port 5060. You can do this by trying to connect to the port using telnet and see if you get a response. If you do, some other software is using the port and 3cx phone system would not start
     

Share This Page