Integrate 3cx with Other Systems

Discussion in '3CX Phone System - General' started by hellopaul, Jul 6, 2007.

  1. hellopaul

    Joined:
    Jul 6, 2007
    Messages:
    6
    Likes Received:
    0
    Hi all. Quite new to telephone systems. I am quite surprise how easy it was to configure up this system but i would like to intergrate it with another system i have (Zultys MX 30).

    Can i set it up so it forwards calls from the 3cx to the zultys system and vice versa using Out bound rules etc. I have it on the bench at the moment so its just for testing at the moment

    Hope you can all help me out with this

    Thanks in advance
     
  2. 5qg4

    5qg4 Active Member

    Joined:
    Jan 31, 2007
    Messages:
    643
    Likes Received:
    0
    Hi hellopaul,

    It should be OK for forwards calls from the 3CX to the Zultys System.

    1. Setup a SIP truck for both 3cx and Zultys.
    2. Setup Out bound rules at both PBXs. eg 81 for 3cx to Zultys ,83 for Zultys to 3cx.

    To call extension 100 at Zultys from 3cx
    - From any 3CX side dial 81100

    To FWD all PSTN to 3CX EXT 100 to Zultys EXT 100
    - At 3CX side set EXT 100 all FWD to 81100 (All PSTN call 3cx EXT 100 will FWD to Zultys EXT 100)
     
  3. hellopaul

    Joined:
    Jul 6, 2007
    Messages:
    6
    Likes Received:
    0
    cheers mate, will give it a goand let you know how i get on

    thanks again
     

Share This Page