Intercom and Outbound rule clash

Discussion in '3CX Phone System - General' started by Henk, Jul 8, 2008.

Thread Status:
Not open for further replies.
  1. Henk

    Henk Member

    Joined:
    Nov 13, 2007
    Messages:
    250
    Likes Received:
    0
    System:
    - sbs 2003
    - Phone AT-520

    Issue:

    When using the intercom function in 3CX it opens two lines, one to the phone I want to use as an intercom and the other to the PSTN line.

    I use outbound rule digit 9 to enable the PSTN direct calls, and obvious this clashes with the intercom function 9<extension>

    Fix (suggesting)
    When 9 is outbound rule, check for the digits dialed and if same as extension digits length use intercom otherwise dial out.

    (something like that, or disable 9 as part of the ability of outbound rule).

    ====edit ==========

    Ooops jumping the gun, forgot the *, seems to be working as it should be. Sorry.

    I am back into my box now

    =========end edit============
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
Thread Status:
Not open for further replies.