Issue after updating to last

Discussion in '3CX Phone System - General' started by amygoda, Dec 28, 2010.

Thread Status:
Not open for further replies.
  1. amygoda

    amygoda Member

    Joined:
    Sep 18, 2006
    Messages:
    436
    Likes Received:
    0
    Hello,
    any idea to solv this issue

    20:19:41.281 Currently active calls [none]
    20:19:39.609 Requests rate from IP 41.38.48.72 is too high! Blacklisted for 334 seconds
    20:19:39.609 [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
    INVITE sip:101@abc.dyndns.org SIP/2.0
    Via: SIP/2.0/UDP 192.168.99.106:6003;branch=z9hG4bK-3765834d;received=41.38.48.72
    Max-Forwards: 70
    Contact: <sip:70773@41.38.48.72:6004>
    To: <sip:101@abc.dyndns.org>
    From: <sip:773@abc.dyndns.org>;tag=4344f11b763af431o2
    Call-ID: 47121ae3-56369509@192.168.99.106
    CSeq: 101 INVITE
    Expires: 240
    Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
    Supported: replaces
    User-Agent: Linksys/SPA962-5.2.8(SC)
    Content-Length: 0

    20:19:39.609 [CM302001]: Authorization system can not identify source of: SipReq: INVITE 101@abc.dyndns.org tid=-3765834d cseq=INVITE contact=773@41.38.48.72:6004 / 101 from(wire)
     
  2. sigma1

    sigma1 Active Member

    Joined:
    Nov 20, 2009
    Messages:
    542
    Likes Received:
    1
    Anti-Hacking feature. Go increase the values at the expense of a bit of security. Settings, advanced, anti-hacking tab
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. amygoda

    amygoda Member

    Joined:
    Sep 18, 2006
    Messages:
    436
    Likes Received:
    0
    Hello,
    How I increase the values at the expense of a bit of security?
     
Thread Status:
Not open for further replies.