Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

LAN SETUP spa-3102

Discussion in '3CX Phone System - General' started by spec, Aug 15, 2008.

Thread Status:
Not open for further replies.
  1. spec

    Joined:
    Sep 8, 2006
    Messages:
    51
    Likes Received:
    0
    Hi

    Here’s the ip I’m using
    netgear router 192.168.0.1
    pc with 3cx 192.168.02
    spa-3102 192.168.0.3

    on the spa-3102 wan setup internet connection settings type = DHCP
    and optional setting primary DNS 192.168.0.1 DNS manual (using this as I’m trying to get the time going.

    On LAN SETUP
    Lan network setting lan ip 192.168.0.3 is that correct or should I point to netgear or 3cx
    Oh and enable DHCP server set to NO

    Does that all sound correct

    Thanks
     
  2. ess

    ess New Member

    Joined:
    Jun 8, 2007
    Messages:
    133
    Likes Received:
    0
    Wan Setup:

    Connection Type: Static IP
    Static IP: 192.168.0.3
    Gateway: 192.168.0.1
    Netmask: Your subnet

    Primary DNS: 192.168.0.1

    Enable WAN Webserver: YES! (important)

    LAN Setup:

    Enable DHCP Server: No
    (Optional) Networking Service: Bridge (so you can connect something to the lan)

    Physical Setup: Plug the SPA3102 into the router using the INTERNET PORT. Not the ethernet port. Optional: Plug a lan device into the Ethernet port.

    Follow the rest of the 3cx guide.

    Let us know how it goes!
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. Henk

    Henk Member

    Joined:
    Nov 13, 2007
    Messages:
    250
    Likes Received:
    0
    I would not have your router as a DNS server, use the DNS server of your ISP.

    I have my WAN IP as the IP of the SPA, I do not use the LAN setup.

    3CX points to the WAN port eg 192.168.0.3
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  4. spec

    Joined:
    Sep 8, 2006
    Messages:
    51
    Likes Received:
    0
    Great got most of it going now thanks have some problems with outgoing pstn calls

    But that shouldn’t go under the heading of lan setup so I’m going to start a new thread.

    Thanks again for the help and maybe you could help with my pstn
     
Thread Status:
Not open for further replies.