Link 3CX to another, non 3CX, PBX

Discussion in '3CX Phone System - General' started by Hcuk, Dec 4, 2007.

  1. Hcuk

    Joined:
    Nov 12, 2007
    Messages:
    11
    Likes Received:
    0
    Is it possible to link a 3CX, either v3 or v5, to another SIP IP PBX?

    I am interested as we have a requirement to migrate users but not all in one go and they need to be on the same system, or the ability to call each other through local extensions.

    Sorry if this is a bit vague, but I need to know if it's possible before we go much further.

    Thanks
     
  2. Ralph

    Ralph Member

    Joined:
    Jun 28, 2007
    Messages:
    417
    Likes Received:
    0
    Good morning

    V5 has the ability to link 2 3CX boxes. I'm not sure if you can use the same linkage to cobble together a non 3CX server with a 3CX server.

    I seem to remember someone had success connecting 2 boxes by using extentions that in turn were related to each box somehow. Basically each box had an extention on the other box.

    You may want to search around the forum a bit.

    Best of luck,
     
  3. alicic

    alicic New Member

    Joined:
    Oct 3, 2007
    Messages:
    119
    Likes Received:
    0
    It can be linked to Cisco Box Using Cisco Call Manager Express.

    Please search this formu, it is explained how. I manage to configure it and to use it throgh Cisco 2801 Gateway running CME with SIP.

    regards,
     

Share This Page