linksys spa3000 hardphone ata

Discussion in '3CX Phone System - General' started by iperez_genius, Jul 8, 2008.

Thread Status:
Not open for further replies.
  1. iperez_genius

    Joined:
    Jul 1, 2008
    Messages:
    56
    Likes Received:
    0
    I have setup my server
    192.168.43.1


    I have setup two softphone clients on two computers
    192.168.43.2 ext 1207
    192.168.43.4 ext 1205

    I havea linksys spa3000 gateway
    192.168.43.3

    and connected to that gateway is a hardphone, old sytle handset.

    I have followed the intructions on how to configure my gateway
    http://www.3cx.com/voip-gateways/sipura-spa3000.html

    and i am still not having any luck.

    Just to be more clear, i am not trying to get a pstn line through the system just to get the hardphone to be another extension on the internal network
    ext 1212

    so my first question is...
    1. Is the setup in the url above the correct setting for simply and internal network extension?
    1.1 If it is what could i be doing wrong, that the extension doesn't register.

    2. If its not correct does anybody know where i can find the correct settings?

    Ilan
    P.s. this is URGENT
     
  2. Henk

    Henk Member

    Joined:
    Nov 13, 2007
    Messages:
    250
    Likes Received:
    0
    The old style handset, if that is a NON IP PHONE it will not work, the FXO port does not make an analogue phone into a SIP phone, so what happens is actually fully normal.

    H.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. iperez_genius

    Joined:
    Jul 1, 2008
    Messages:
    56
    Likes Received:
    0
    I will just re-iterate to makesure everything is clear...
    attach is an image of how things are set-up

    also the rego and subscriber setup for line1

    and pstn line for the linksys supura spa-3000


    Henk can you confirm that your comment you made earlier is still valid


    ilan
     
  4. Henk

    Henk Member

    Joined:
    Nov 13, 2007
    Messages:
    250
    Likes Received:
    0
    No worries,

    Your touch phone, can do the following things (if configured correctly):
    - Make calls out:
    -- Via VOIP provider without using 3CX
    -- Via PSTN either direct or if VOIP provider is not available
    - Rings when someone calls the PSTN line

    What it cannot do is:
    - Work as an extension in 3CX, well not to my knowledge anyway.

    Issue you have:
    The VOIP provider needs to be configured in the SPA, this is an issue because you configure this in 3CX instead of the SPA when you have a 3cx system.
    3CX registers with the VOIP provider.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
Thread Status:
Not open for further replies.