Linksys SPA3102 Dial Plan using analogue line

Discussion in '3CX Phone System - General' started by msmith, Sep 11, 2009.

Thread Status:
Not open for further replies.
  1. msmith

    Joined:
    Sep 11, 2009
    Messages:
    2
    Likes Received:
    0
    Hi,

    Does anybody know how to set the dial plan of a Linksys SPA3102 so that 'external' calls (prefixed with a 9) use the analogue port directly, whilst internal calls to other extensions are routed to the 3cx server?

    Many thanks,

    Mark
     
  2. msmith

    Joined:
    Sep 11, 2009
    Messages:
    2
    Likes Received:
    0
    No worries, I have sorted it. To get 3 digit numbers dialled via 3cx and external numbers prefixed with a 9 on to the analogue line, I used the following dial plan within the 'Line 1' tab:

    (<[3]xxxS0>|<9,:>x.<:mad:gw0>)
     
Thread Status:
Not open for further replies.