Linksys SPA921

Discussion in '3CX Phone System - General' started by fraggle, Sep 26, 2008.

Thread Status:
Not open for further replies.
  1. fraggle

    Joined:
    Sep 22, 2008
    Messages:
    17
    Likes Received:
    0
    I have the above phone. I set the oublund rule up in 3cx to that you dial # to use voip.

    When I dial # the phone ends the call immediately
     
  2. amygoda

    amygoda Member

    Joined:
    Sep 18, 2006
    Messages:
    436
    Likes Received:
    0
    Because of dial plan
    use numbers better
     
  3. nmartin

    Joined:
    Sep 25, 2008
    Messages:
    2
    Likes Received:
    0
    As amygoda sys, it's to do with the phone's configured dial plan. Download the phone Administrator's Guide at http://www.LinkSys.com and look at the section:

    LinkSys IP Phone Field Reference -> Ext Tab -> Dial Plan

    and you will see a description of how the phone matches the dialled number against its 'acceptable' number format (a bit like a regular expression match statement).

    By playing around with the expression you may be able to craft a dial plan to match your requirement. See http://en.wikipedia.org/wiki/VoIP_Dial_Plan for more information.
     
Thread Status:
Not open for further replies.