Linksys SPA941 with 3cx

Discussion in '3CX Phone System - General' started by afpr, Oct 9, 2007.

  1. afpr

    Joined:
    Oct 9, 2007
    Messages:
    3
    Likes Received:
    0
    Hello,

    how to configure my linksys spa941 to make calls with 3cx phone system?

    thanks
     
  2. Mirzab

    Mirzab Member

    Joined:
    Jul 22, 2007
    Messages:
    400
    Likes Received:
    0
  3. nickybrg

    nickybrg Well-Known Member
    3CX Staff

    Joined:
    Jun 7, 2007
    Messages:
    1,621
    Likes Received:
    15
    Note

    For mwi to work you have to set to NO. Yes it is strange but just tested. This phone does not need a SUBSCRIBE to MWI and therefore it is very misleading. Setting it to yes will have the MWI light remain ON constantly whether or not you read the voicemails or not.

    BRGDS
     
  4. LORD ORION

    Joined:
    Jul 23, 2007
    Messages:
    39
    Likes Received:
    0
    I am using a 941 at home... the 921 guide should be adequate to setup registration.

    The only difference I found is that there is only 1 entry for the 3CX server address on the 941, instead of 2 (the extra one in the 921 menu being for outbound proxy)
     
  5. nickybrg

    nickybrg Well-Known Member
    3CX Staff

    Joined:
    Jun 7, 2007
    Messages:
    1,621
    Likes Received:
    15
    Hi

    Ignore outbound proxy for now
     
  6. afpr

    Joined:
    Oct 9, 2007
    Messages:
    3
    Likes Received:
    0
    thank you for all
     

Share This Page