Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

Mitel 400 office Mivoice bridge with 3CX

Discussion in '3CX Phone System - General' started by Yiannos Ioannou, Nov 13, 2017.

Thread Status:
Not open for further replies.
  1. Yiannos Ioannou

    Joined:
    Nov 13, 2017
    Messages:
    20
    Likes Received:
    2
    Dear All ,

    We are trying to bridge an existing Mitel 400 pbx with 3CX. There range in the Mitel is 1xxx
    So far we create a bridge in the 3CX and a SIP Connection to the Mitel. So far both of them are connected.

    To calling from 3CX to mitel we had to create the extension number in the inbound rule of the Mitel be able to reach it. The problem is with the outbound rule of the Mitel to reach the 3CX.

    Any ideas to do that ?

    So far we have one way connection. Only the 3CX can call the Mitel extensions
     
Thread Status:
Not open for further replies.