Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

Mitel 5312

Discussion in '3CX Phone System - General' started by multiequip, Oct 23, 2014.

Thread Status:
Not open for further replies.
  1. multiequip

    Joined:
    Oct 23, 2014
    Messages:
    2
    Likes Received:
    0
    Hi All,

    Does anyone know how to get a Mitel 5312 to work with 3CX?

    Kind Regards,
    Jamie.
     
  2. AndreasA_3cx

    AndreasA_3cx Guest

    Hello Jamie and thank you for contacting us.

    Unfortunately Mitel 5312 is not supported or tested by 3CX.
    That being said we cannot confirm any functionality of the specific model.
    You can find a list of the supported hardware in the following link: http://www.3cx.com/support/

    Kind Regards
     
  3. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    11,117
    Likes Received:
    329
    I have a couple of Mitel sets, can't confirm that they are the 5313, but they looked similar. I tried them out for a while, then packed them a way a couple of years ago.

    As I recall...first off, the sets have to have a SIP firmware load (off hand I can't remember where I got one, but most likely a search on the web), I think this required the use of a tftp server. After that it was just a matter of logging into the set and manually programming it using the GUI.
     
  4. jasit

    jasit New Member

    Joined:
    Feb 12, 2013
    Messages:
    172
    Likes Received:
    1
    if you google "Mitel 5312 sip settings" you should be able to find a doc on how to change it to use sip settings. you may have to download the right firmware too, your phones may have only the Mitel firmware on them and not the Mitel/Sip firmware. A quick google should help you find out.
     
Thread Status:
Not open for further replies.