newbie HELP to get feet of the ground

Discussion in '3CX Phone System - General' started by seanc, Jun 22, 2015.

Thread Status:
Not open for further replies.
  1. seanc

    Joined:
    May 25, 2015
    Messages:
    25
    Likes Received:
    0
    Hi all, newbie alert :mrgreen:

    I have a HP server, which has 2 NIC's
    do i use both NIC's?
    Is 1 NIC for internet traffic and the other NIC for 3cx/SIP traffic?


    My SIP provider has told me i need to manualy enter my IP address, gateway and DNS to 10.x.x.x

    Do i use 192.x.x.x on the other NIC ?


    when i do what i think i need to do, internet doesnt work due to a message about gateway conflicts on NIC's

    help :)
     
  2. Saqqara

    Saqqara Active Member

    Joined:
    Mar 12, 2014
    Messages:
    874
    Likes Received:
    133
    Use one network card in the server, 3cx does not work with two network cards

    Protect your network using a firewall, http://www.3cx.com/docs/firewall-router-configuration-VoIP

    You will configure the wan port of the firewall and config it with your ISP IP address info, then open the ports up to point to the internal IP address of the server
     
Thread Status:
Not open for further replies.