Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

No internal or external outbound calls

Discussion in '3CX Phone System - General' started by adammason, Dec 21, 2011.

Thread Status:
Not open for further replies.
  1. adammason

    Joined:
    Dec 21, 2011
    Messages:
    14
    Likes Received:
    0
    I have a 3CX server running at the office (not at location of phones).

    I have connected 4 phones and 2 mobiles fine, show up and linked established etc.

    They are in ring groups and linked with a sipgate account.. all ring and can answer no problem.

    I cant seem to make internal calls (eg. 100, 101 or voicemail etc) or to external numbers.

    I have tried looking through out the config and just cant find what I need to set.

    When a call is going to be made internal or external via phone (All are Cisco IP Phone 7940 Series) it goes to make the call but a message of 'reorder' appears and hangs up.

    Any ideas?
     
  2. adammason

    Joined:
    Dec 21, 2011
    Messages:
    14
    Likes Received:
    0
    I can call the the sip number and all phones can ring and answer on all devices
     
  3. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    11,117
    Likes Received:
    329
    First, check the 3CX log, just after attempting a call. Does it show up? If so is should show why it is failing. If you aren't sure what you are dealing with then post the log here.

    If you don't see any sign of a call attempt in the logs , then it may be a setting in the phone.

    It may very well be be something in the internal dialplan, in the set, that is preventing the dialled digits from even being sent.
     
  4. adammason

    Joined:
    Dec 21, 2011
    Messages:
    14
    Likes Received:
    0
    22:06:23.421 [CM502001]: Source info: From: "Adam"<sip:100@<myhostname>.getmyip.com>;tag=0019305dae7200302788c8ac-110991ed<sip:07837190###@<myhostname>.getmyip.com>
    22:06:23.421 [CM503013]: Call(95): Incoming call rejected, caller is unknown; msg=SipReq: INVITE 07837190###@<myhostname>.getmyip.com tid=401f9354 cseq=INVITE contact=100@86.171.18.73:1030 / 102 from(wire)
    22:06:23.406 [CM500002]: Info on incoming INVITE:
    INVITE sip:07837190###@<myhostname>.getmyip.com SIP/2.0
    Via: SIP/2.0/UDP 86.171.18.73:1030;branch=z9hG4bK401f9354
    Contact: <sip:100@86.171.18.73:1030>
    To: <sip:07837190###@<myhostname>.getmyip.com>
    From: "Adam"<sip:100@<myhostname>.getmyip.com>;tag=0019305dae7200302788c8ac-110991ed
    Call-ID: 0019305d-ae72001b-5e7f061d-35d96808@192.168.0.21
    CSeq: 102 INVITE
    Expires: 180
    Date: Wed, 21 Dec 2011 22:06:54 GMT
    Proxy-Authorization: Digest username="100",realm="3CXPhoneSystem",uri="sip:86.144.83.68",response="ef7c04e5ec6cee00390af1a94005cf1b",nonce="414d535c0502e95f09:261e59f0c5c5f50a3c613f37517bdfe8",algorithm=MD5
    User-Agent: CSCO/6
    Content-Length: 0

    22:06:23.078 [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
    INVITE sip:07837190###@<myhostname>.getmyip.com SIP/2.0
    Via: SIP/2.0/UDP 86.171.18.73:1030;branch=z9hG4bK2ecdb46f
    Contact: <sip:100@86.171.18.73:1030>
    To: <sip:07837190###@<myhostname>.getmyip.com>
    From: "Adam"<sip:100@<myhostname>.getmyip.com>;tag=0019305dae7200302788c8ac-110991ed
    Call-ID: 0019305d-ae72001b-5e7f061d-35d96808@192.168.0.21
    CSeq: 101 INVITE
    Expires: 180
    Accept: application/sdp
    Date: Wed, 21 Dec 2011 22:06:53 GMT
    User-Agent: CSCO/6
    Content-Length: 0

    22:06:23.078 [CM302001]: Authorization system can not identify source of: SipReq: INVITE 07837190###@<myhostname>.getmyip.com tid=2ecdb46f cseq=INVITE contact=100@86.171.18.73:1030 / 101 from(wire)
     
  5. adammason

    Joined:
    Dec 21, 2011
    Messages:
    14
    Likes Received:
    0
    ive masked my mobile number and hostname of the server..
     
  6. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    11,117
    Likes Received:
    329
    You are using a URL (getmyip.com) rather than an IP to send the call to 3CX. You need to be sure that you have that URL datafilled in 3CX as your Domain Name or any call attempts will be rejected.
     
  7. bigpunn03

    Joined:
    Dec 22, 2011
    Messages:
    1
    Likes Received:
    0
    Don't mean to jack the thread but I'm having the same issue. Here is my log:


    20:05:51.132 [CM502001]: Source info: From: "1001"<sip:1001@ymaster>;tag=b4659848<sip:1003@ymaster>
    20:05:51.132 [CM503013]: Call(24): Incoming call rejected, caller is unknown; msg=SipReq: INVITE 1003@ymaster tid=54b08614dc364aeb cseq=INVITE contact=1001@192.168.200.10:10590 / 2 from(wire)
    20:05:51.012 [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
    INVITE sip:1003@ymaster;transport=udp SIP/2.0
    Via: SIP/2.0/UDP 192.168.200.10:10590;branch=z9hG4bK-d8754z-5d43fa118fa86eba-1---d8754z-;rport=10590
    Max-Forwards: 70
    Contact: <sip:1001@192.168.200.10:10590;transport=udp>
    To: <sip:1003@ymaster>
    From: "1001"<sip:1001@ymaster>;tag=b4659848
    Call-ID: NGJiOWYwZjg5MTcyZmJlNDdmZDA1NThhYzg5NjgwOWQ.
    CSeq: 1 INVITE
    Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO
    Supported: replaces
    User-Agent: X-Lite 4 release 4.1 stamp 63214
    Content-Length: 0
    20:05:51.012 [CM302001]: Authorization system can not identify source of: SipReq: INVITE 1003@ymaster tid=5d43fa118fa86eba cseq=INVITE contact=1001@192.168.200.10:10590 / 1 from(wire)
    19:59:20.300 [CM503013]: Call(23): Incoming call rejected, caller is unknown; msg=SipReq: INVITE 1003@ymaster tid=a7049e28554dfe20 cseq=INVITE contact=1001@192.168.200.10:10590 / 2 from(wire)
    INVITE sip:1003@ymaster;transport=udp SIP/2.0
    Max-Forwards: 70
    To: <sip:1003@ymaster>
    Call-ID: NzYwZTYwYjkxM2MyZDY2ZjRmY2RlY2EwMWMwZGJjYzY.
    Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO
    User-Agent: X-Lite 4 release 4.1 stamp 63214
    19:58:14.653 [CM502001]: Source info: From: "1003"<sip:1003@ymaster>;tag=f2e79dca<sip:1001@ymaster>
    19:58:14.520 [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
    Via: SIP/2.0/UDP 192.168.200.12:14168;branch=z9hG4bK-d8754z-87f4fdbe9b911f28-1---d8754z-;rport=14168
    Contact: <sip:1003@192.168.200.12:14168;transport=udp>
    From: "1003"<sip:1003@ymaster>;tag=f2e79dca
    CSeq: 1 INVITE
    Supported: replaces
    Content-Length: 0
    19:58:14.519 [CM302001]: Authorization system can not identify source of: SipReq: INVITE 1001@ymaster tid=87f4fdbe9b911f28 cseq=INVITE contact=1003@192.168.200.12:14168 / 1 from(wire)
     
  8. adammason

    Joined:
    Dec 21, 2011
    Messages:
    14
    Likes Received:
    0
    Hijack away lol

    Is there a way to allow hostnames or execptions ?
     
  9. adammason

    Joined:
    Dec 21, 2011
    Messages:
    14
    Likes Received:
    0
    Internal phones / mobiles can make and recieve calls internal and external.

    External phones cant due to hostname .getmyip.com.. it is set in the public IP setting..
     
  10. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    11,117
    Likes Received:
    329
    If you don't have a static IP at the 3CX end, one that you put into the "remote" set as the server address, then you probably use a Dynamic DNS service. If you do have a static IP you may prefer to use a Domain name, that you choose for your business rather than the IP.

    If, in the remote set, you use a URL as the 3CX server address, you need to put that into 3CX as the Domain Name, in the Advanced settings.
     
  11. adammason

    Joined:
    Dec 21, 2011
    Messages:
    14
    Likes Received:
    0
    Found out it was ip problem.. i used the ip address rather than dynamic address when connecting and it was all ok.
     
Thread Status:
Not open for further replies.