Nokia e61 - Help me

Discussion in '3CX Phone System - General' started by m.serraglio, Feb 19, 2008.

Thread Status:
Not open for further replies.
  1. m.serraglio

    Joined:
    Feb 15, 2008
    Messages:
    7
    Likes Received:
    0
    Please help!
    I tried to set my nokia e61 but failed to register in my switchboard 3cx ...
    Someone helps me to configure it?
    Thanks

    Marco Serraglio
     
  2. alicic

    alicic New Member

    Joined:
    Oct 3, 2007
    Messages:
    119
    Likes Received:
    0
    Here it comes,

    Create an extension in 3cx for example "100" and password: "100"
    after that enter the settings in your phone

    1. Go to "Tools" and then to "Settings"
    2. Go to "Connection"
    3. Go to "SIP settings"
    4. Add a new default profile
    5. enter the following settings:

    Profile name: 3cx
    Service profile: IETF
    Default access point: choose your WLAN access point
    Public user name: your extension@ip from your 3cx-server (Example: 100@192.168.1.1)
    Use compression: No
    Registration: Always on or When needed
    Use security: No

    Proxy server:

    Proxy server address: ip from your 3cx-server (example: 192.168.1.1)
    Realm: 3CXPhoneSystem
    User name: your extension (example: 100)
    Password: the password of your extension
    Allow loose routing: Yes
    Transport type: UDP
    Port: 5060

    Registrar server:

    Registrar serv. addr. : ip from your 3cx-server (example: 192.168.1.1)
    Realm: 3CXPhoneSystem
    User name: your extension (example: 100)
    Password: the password of your extension
    Transport type: UDP
    Port: 5060

    Now go back to "Connection" and then to "Internet tel. settings"

    create a new profile:
    Name: 3cx
    SIP profiles: 3cx

    And then it works
     
  3. m.serraglio

    Joined:
    Feb 15, 2008
    Messages:
    7
    Likes Received:
    0
    Beautiful ... Work ....
    I now remained only the problem of not being able to dial telephones internal or external number from nokia ....
    What should I do?

    Thanks ,

    Marco Serraglio
     
  4. alicic

    alicic New Member

    Joined:
    Oct 3, 2007
    Messages:
    119
    Likes Received:
    0
    Find the option in 3cx - Bind voice to media Server, and unselect this, and it shpul work perfectly

    regards
     
Thread Status:
Not open for further replies.