Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

Original called ID over the second sip trunk

Discussion in '3CX Phone System - General' started by mixig, Dec 16, 2013.

Thread Status:
Not open for further replies.
  1. mixig

    mixig Active Member

    Joined:
    Dec 13, 2011
    Messages:
    530
    Likes Received:
    12
    Hi,

    is it possible to do this:
    I have 2 sip trunks, one si connected to my local telco and the another one is connected to some other pbx (VPN). What i am trying to accomplish is when outside person is callin DID number which is on DID i do "forward to outside number" -> e.g. 750 -> for that number i have an outbound rule whcih says send that to sip trunk 2 (other pbx). That part is working but i am sending new number in "from" field (main number from sip trunk one)-> I know this is right but i am interesting can i somehow keep the original number and send it to sip trunk 2?

    Thanks
     
  2. sigma1

    sigma1 Active Member

    Joined:
    Nov 20, 2009
    Messages:
    542
    Likes Received:
    1
    Easiest way is to setup "some other" PBX not as a peer but register it against a 3CX extension credentials. This passes the caller ID fine. No Bridge/trunk.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. donbru01

    donbru01 New Member

    Joined:
    Nov 30, 2011
    Messages:
    134
    Likes Received:
    0
    I have solved this on my network with 30cx , 2 cucm , 3 wildix system
    Outbound setting on from user part = originator caller id number will be set
     
Thread Status:
Not open for further replies.